Alright guys, I have returned and I brought a slight tutorial/template with me
Lets get started
First off, you're going to want to print the card, which I have supplied for you all
You wont want to modify the size of the card, this is the same size as the scanned one, and if printed on an 8 X 5 piece of paper, will fit perfectly.
Next is obvious, cut it out! Take time to make detailed cuts in the paper. You don't want it to have strange chopped off edges now!
Then what I did next was I got the glue. For this, I used this glue
Any clear glue will work, even a glue stick. I put a little on my finger and "painted" it onto an existing wow card. I used the Qtip to get some edges once the card was glued and my finger was too big.
Next, you want to place the printed card very precisely onto the glue
Make sure you apply it to where there are no white edges, you want it to look good
I would then put something heavy and flat ontop of the card, this way it dries flat and doesn't bend from the glue
and here is the final result
And now you have a Spectral Tiger card
