MMOwned - World of Warcraft Exploits, Hacks, Bots and Guides

[World Building] Path to Dwarven Village

newtech — Fri, 20 Nov 2009 21:31:21 GMT

Hey
Once again I've made a path. This time; a bit different. Leads from XXX to the small village just east of southen Arathi Highlands. I had some difficults making it. It keeped crashing when ever I added new WMO's and M2 Objects so i had to change the path and "steal" 2 objects. 1xWMO and 1xM2 :( I dont have time to post pictures RIGHT now but I'll make it in a few minutes... :)

Regards Newtech

[Useless] Trial of the Crusader map bug

stoneblade — Fri, 20 Nov 2009 21:25:58 GMT

I guess this could be considered exploration but im not to sure, as already stated its useless but you can trick people into thinking there is nobody in the instance if you know what your doing.

1. Enter Trial of the Crusader.
2. Open your map.
3. Use the arrows next to the drop down list to go to area 2.
4. Go back to area 1 using the arrows next to the dropdown list.
5. It will show nobody on the map until you press your map key again or leave the instance.

Environment.newline

Ron John — Fri, 20 Nov 2009 21:00:52 GMT

How would i use environment.newline in: "textbox.text.replace". My attempt: "textBox1.Text = (textBox1.Text.Replace("X", "|") + Environment.NewLine);" did not work any alternative method or working method would be appreciated i am using visual c# 2008

Look what i did to this hacked account.

Mrbrightside — Fri, 20 Nov 2009 19:33:34 GMT

I phished this guys account, then i logged in and then he kicked me back out so i ctrl+c the word delete went into his account and ctrl+v to all of his characters to delete them, so he kicked me out again xD i can imagine his face! so anyways i thought of this great plan and did this....

Anyways please tell me what you think of it!

Putting large gold amounts on low-level accounts

Altair87 — Fri, 20 Nov 2009 19:05:53 GMT

I've got a new account with low-level characters that I plan to start leveling. I was thinking about buying 5k or so in gold right now, not because I need it now, but because if I'm going to get banned for buying gold, I'd rather it happen early on before I've put in a lot of time on these characters.

I was wondering, however, whether WoW might notice the strange fact that a level 5 warrior has 5k in gold. Does anyone know whether Blizzard monitors the amount of gold in peoples' accounts to see whether it's consistent with their level?

Also, is there any precedent for WoW banning an actual person, instead of just his account. I've got a squeaky clean main account that is under the same credit card as my shady account. If they catch me buying gold on the shady account, is there any chance they would punish both of my accounts?

Dumping buffs

XAutomation — Fri, 20 Nov 2009 18:25:59 GMT

Hello,

I have search before posting, and this is what I came up with!
Im trying to dump buffs...

Code:

Const $AURA_COUNT_1 = 0xDD8

Const $AURA_COUNT_2 = 0xC5C

Const $AURA_TABLE_1 = 0xC64

Const $AURA_TABLE_2 = 0xC60

Const $AURA_SIZE = 0x18

Const $AURA_SPELL_ID = 0x8



$auraTable = $pBase + $AURA_TABLE_1

$auraCount = _BMReadUInt($handle, $pBase + $AURA_COUNT_1)

$i = $auraCount

$spellId = _BMReadUInt($handle, $auraTable + $AURA_SIZE * $i + $AURA_SPELL_ID)

MsgBox(64, "Buff", $spellId)

Now I know im doing something wrong as it always returns 0!
Any ideas?

[LF Help] Calculator

-Jebus Fist- — Fri, 20 Nov 2009 18:13:53 GMT

Im looking for a way to calculate something like this in cpp:
x = √y * z

heres a part of my script so that you can make the 'fix' compatible.

Code:

           case '2':

                cout<<"\n";

                cout<<"Write the amount of Resistance..\n";

                cin>>num;

                cout<<"Write the amount of Current..\n";

                cin>>num2;

                cout<
                cout<<"\n";

                cout<<"\n";

                break;

[List] 3500+ Gameobject ID's for ArcEmu

Ground Zero — Fri, 20 Nov 2009 17:57:29 GMT

~~ I got these ID's from Converting My DBCs into CSVs. I do not take credit this is just a copy and paste from my DBCs. Im sharing this for people who don't know how to read DBCs or convert them. ~~

Here it the list;
pastebin - collaborative debugging tool
Enjoy.

[Program] Bypass Blocks in School! No installation Required.

Ground Zero — Fri, 20 Nov 2009 17:48:34 GMT

Tor project has just released a portable free proxy program, which has Firefox included which doesn't need any installation or admin privilages.

This will only work if your school/college allows useage of Pen Drives/ CD's.

Go to Tor: anonymity online
Click on the Downloads Tab
Download Tor Browser Bundle for Windows.

Plug your pendrive into your computer. Then run the Tor Setup, Choose your location of your pendrive to extract to. Then all you need to do is when your at school, plug your pendrive in and run Tor Browser.exe and it will set itself up and you can bypass any blocks. Its really useful if your college blocks Hotmail, Youtube, Facebook Etc. :)

[Glitch] BRAND new way under Northrend!

Leonim — Fri, 20 Nov 2009 17:18:23 GMT

Hey! I found this BRAND new way to get under Northrend, from The Chamber of Aspects...

YouTube - New Way under Northrend!

Quote:

YouTube - New Way under Northrend!

sry, too lazy to add music lol

[Request] Old Glitchy's MES and a working BLP converter

Xel — Fri, 20 Nov 2009 16:53:30 GMT

I needed to reinstall all my Model Editing programs.
These are ones I am still missing.

Glitchy's old MES (DL link is dead)
Working BLP converter (old ones don't work with custom textures it seems)

Thank you.

[WTS] Level 80 Male Troll Death Knight (PvP) $168

Ket — Fri, 20 Nov 2009 16:35:45 GMT

Level 80 Male Troll Death Knight (PvP)

MyMMOGear.com

12 Level 80 Epics
4 Rare Drops
Gladiators Desecration: 1/5 Savage Gladiators Desecration
Scourgeborne Battlegear: 1/5 Valorous Scourgeborne Battlegear
Scourgeborne Battlegear: 1/5 Heroes Scourgeborne Battlegear

Item Source:
1 DrakTharon Keep (Heroic)
1 Naxxramas
2 Naxxramas (Heroic)
1 Nexus (Heroic)

Health: 21701
Mana: 100

Talent: Blood
Power: 3201
Crit Chance: 21.57 %
Hit Rating: 252

Transferrable
Herbalism : 75 / 150
Inscription : 443 / 450
Riding 225 / 225

Only $168, you can check out account# 12591 at Accounts.net:

Buy World of Warcraft Accounts or WoW Accounts

[WTS] Level 80 Female Night Elf Death Knight (PvE) 6 Level 80 Epics $148

Ket — Fri, 20 Nov 2009 16:31:05 GMT

Level 80 Female Night Elf Death Knight (PvE)

6 Level 80 Epics
10 Rare Drops

MyMMOGear.com

Item Source:
2 Ahnkahet: The Old Kingdom (Heroic)
1 Azjol-Nerub (Heroic)
1 DrakTharon Keep (Heroic)
2 Gundrak (Heroic)
1 Halls of Stone (Heroic)
1 Naxxramas

Health: 23071
Mana: 100

Talent: Frost
Power: 1934
Crit Chance: 6.39 %
Hit Rating: 92

Transferrable
Blacksmithing : 231 / 300
Mining : 213 / 300
Riding 300 / 300
6 Level 80 Epics
10 Rare Drops

Item Source:
2 Ahnkahet: The Old Kingdom (Heroic)
1 Azjol-Nerub (Heroic)
1 DrakTharon Keep (Heroic)
2 Gundrak (Heroic)
1 Halls of Stone (Heroic)
1 Naxxramas

Health: 23071
Mana: 100

Talent: Frost
Power: 1934
Crit Chance: 6.39 %
Hit Rating: 92

Transferrable
Blacksmithing : 231 / 300
Mining : 213 / 300
Riding 300 / 300

Only $148, you can check out the account #7810 here at Accounts.net:

Buy World of Warcraft Accounts or WoW Accounts

[Aspiredev]Developer Recruitment

xSpectre — Fri, 20 Nov 2009 16:16:50 GMT

Hello the Aspiredev team is looking for skilled C++ developers to join our team!!

If you wish to apply as a developer please post an application with the following format, all dev applications which are not in this format will be ignored/deleted.

Name:

Age:

Why do you want to join AspireDev:

Links to patches you've done (Required):

Have you helped or assisted AspireDev in anyway prior to posting this app (List ways):

Give us some background on your programming experience:

Have you ever been a part of a emulation development team? (if so give details):

Do you currently run or work for a WoW Server:

Any extra info you'd like to add:

Come post your application Here

Code:

forums.aspiredev.net/forumdisplay.php?f=22

[World Building] Noggit WMO saving Error

newtech — Fri, 20 Nov 2009 15:55:06 GMT

Hey
I have this problem... Once I've placed a WMO with Cryects Tools just like you shall, and I go ingame it crashes when i try to save it. Ive changed the unique Id, the registering number (Like how many WMO's it should register) and all other neceserry things. And the wierdest part is that Ive been able to place WMO's and M2 objects before with Noggit. This is an error thats new for me. Doesnt it look right to you? :O Never appeared before... :( Please help someone?

Regards Newtech.

Get out from ToC and change zone to Icecrown [Mage only]

agni — Fri, 20 Nov 2009 15:53:29 GMT

I was raiding and found out a way to blink through the invisible wall.

You can get to the icy depths or explore the mountain area a bit or go to this house which changes your zone to Icecrown while still inside in ToC.

YouTube - Wow 3.2 outside from toc

[Login] How to change the title screen music.

Rocker956 — Fri, 20 Nov 2009 15:36:13 GMT

This is how you can change the title music to whatever you want.

Before you bother to read the rest, make sure you have MyWarcraftStudio.

I also suggest you extract everything thats related to the title screen from your MPQs, I downloaded an MPQ to make it the BC background so I already have it. It removes the ESRB stuff so you don't have to.

DL Link of it: http://www.mmowned.com/forums/simple...ackground.html.

Boot up MyWarcraftStudio and open the patch you downloaded via Edit MPQ Archive at the Pack tab in MyWarcraftStudio, or just press P and click Edit MPQ Archive and open your MPQ.

Now go to the mp3 you want to make it, for example, I will make it the Unreal Gold theme and rename it "WotLK_main_title". Now go the the Pack tab in MyWarcraftStudio again and click "Add file to archive.". Make it so it says "Sound\Music\GlueScreenMusic\WotLK_main_title.mp3" so it ends up in the folder. Don't forget to delete the original mp3 when you do it and when it says an error, ignore it and add the Sound\Music thing in there. After all of that work, save and close the MPQ and MWCS, and now open up the game. It should work now!

Have fun!

[Release] BabBot

tanis2000 — Fri, 20 Nov 2009 15:10:21 GMT

** WARNING ** This not is not in a finished state. You should consider this as an alpha release intended for TESTING ONLY **

BabBot is yet another Open Source WoW automata.

For those who have never heard of it, there is an old thread here on MMOwned with some outdated info: http://www.mmowned.com/forums/bots-p...se-babbot.html

Download (32bit): https://sourceforge.net/projects/bab...7.zip/download
Download (64bit): https://sourceforge.net/projects/bab...4.zip/download

The current feature list is limited to the following:
- Works on XP and Vista (32bit and 64bit) and it's being tested on Windows 7
- Runs as guest
- Can launch WoW client
- Has included C# scripting support (for combat and various scripts)
- Can learn waypoints and walk through them
- Can load/save route profiles
- Can unstuck
- Can fight
- Can loot

Still missing:
- Running to vendor/repair
- Definitions for different classes
- Questing
- Gathering nodes

I know perfectly that some missing features are very important, but for those that have been following the discussion about this bot, it all started as a study and has now moved to an Open Source project at SourceForge.
This means that if you're willing to lend a hand with code (it's written in C#) you can jump in and join the development team and help bringing in all the missing features.

Documentation can be found at https://sourceforge.net/apps/trac/ba...#Documentation

Documentation is still in an early stage. We try to keep it up to date but the code is changing often and it's hard to keep the pace.

BabBot comes with a sample script that is based on the Paladin class. It can be used as a starting point to make your own scripts for other classes or for specific tasks but there currently isn't the documentation for it. You can learn how to use it by looking at the example for now. BabBot has a very powerful Finite State Machine that we are using to make bot actions as atomic as possible.

Have fun with it. All bug reports should go to the Trac at SourceForge:
https://apps.sourceforge.net/trac/babbot/newticket

If you need to get in touch with the team please use the project's forum at https://sourceforge.net/apps/phpbb/babbot/

Latest revisions of arcemu (2950 onwards) crash after 1 min

pcrew — Fri, 20 Nov 2009 13:02:23 GMT

Basically it will crash straight after fully loading with a segmentation fault.

GDB Returns :

Code:

Program received signal EXC_BAD_ACCESS, Could not access memory.

Reason: KERN_INVALID_ADDRESS at address: 0x000000000000000e

[Switching to process 3368]

0x00007fff81a09025 in strtoul_l ()

This started after an update from 2950 to a higher revision (don't remember which one)

Any ideas?

How to optimize your WOW

Gotxi — Fri, 20 Nov 2009 12:54:02 GMT

Well, this is my first real contribution to mmowned comunity, i hope this will help you getting a better playing experience with wow.
I know this is a repost, but im doing a recopilation, so here it is anyway.

These are my personal stuff recopilation for getting better FPS and latency:

- Leatrix Latency Fix:
This modify your TCP protocol to have more responses, and then allows you to have a better latency in WOW and other online games and app's that uses TCP protocol. (better explanation in link)

Leatrix Latency Fix : WoWInterface Downloads : WoW Tools & Utilities

- Latency Fix for MAC:
Same as above, but this is for MAC (didn't tested it because i dont have a mac)
fix latency - download tag - Softpedia

- Have better FPS in AOE's:
With this console command in wow, you can decrease the number of elements that fall in some AOE's like Blizzard (mage), or Hellfire (warlock) or Volley (hunter) set it to 1 for best performance. You can type it in the wow chat box, or make a macro with the command and click it.

Quote:

/console SpellEffectLevel 1

This is the normal number:

Quote:

/console SpellEffectLevel 9

This is for fun! (expect to crash your wow if you have a very bad machine):

Quote:

/console SpellEffectLevel 500

- Lower even more your wow graphics:
�Still bad FPS? lower your wow graphics even more that wow allows in their options to play it in machines from the past millenium.

Create this macro in-game and execute it:

Quote:

/console gxcolorbits 16
/console gxdepthbits 16
/console skycloudlod 0
/console particledensity 0.3
/console lod 0
/console fullalpha 0
/console doodadanim 0
/console mapshadows 0
/console loddist 50
/console smallcull 2
/console maxlights 0
/console specular 0
/console pixelshader 0
/console detaildensity 1
/console unitdrawdist 20
/console waterlod 0
/console basemip 1
/console shadowlevel 1
/console alphalevel 1
/console anisotropic 16
/console textureloddist 80
/console light 0
/console fog 0
/console bitdepth 16
/console showwater 0
/console maxlod 0
/console watermaxlod 0
/console waterwaves 0
/console waterspecular 0
/console waterripples 0
/console waterparticulates 0
/console showshadow 0
/console skyclouddensity 0
/console skysunglare 0
/console skyshow 0
/console gxrestart

If your UI dont restart itself with this macro, restart it manually with /rl command

Sorry for if i did some english mistakes, im spanish :P
I hope it helps!

AVS Error

92eatos — Fri, 20 Nov 2009 11:50:39 GMT

I spent over a 5 hours to find where is mistake for this vote system...
It do every thing fine but when i press to spend vote points it says there is no realm, you dont have character and there is no rewards...But everything is setted right it worked before i instaled windows 7 and php 5.3.0
So can any one try to update this script

Code:




class Rewards

{

        function Title()

        {

                ?>

                Reward panel


        }



        function GetRealmData()

        {

                //Get data to use in the form.

                $Con = mysql_connect(MYSQL_HOST,MYSQL_USER,MYSQL_PASS,true);

                mysql_select_db(MYSQL_DB,$Con);

                

                $RealmInfo = "{";

                //get each realm

                $res = mysql_query("SELECT id,name,sqlhost,sqluser,sqlpass,chardb FROM realms",$Con);

                echo mysql_error();

                while($Row = mysql_fetch_array($res))

                {

                        $RealmInfo .= $Row['id'].":{name:\"".$Row['name']."\"},";

                }

                if(strlen($RealmInfo) > 1)

                        $RealmInfo = substr($RealmInfo,0,strlen($RealmInfo)-1)."}";

                else

                        $RealmInfo .='}';

                mysql_close($Con);

                return $RealmInfo;

        }

        

        function GetCharData()

        {

                //get data that will be used to select the character.

                $Con = mysql_connect(MYSQL_HOST,MYSQL_USER,MYSQL_PASS,true);

                mysql_select_db(MYSQL_DB,$Con);

                

                $CharInfo = "{";

                $Index = 0;

                $res = mysql_query("SELECT id,sqlhost,sqluser,sqlpass,chardb FROM realms");

                while($Row = mysql_fetch_array($res))

                {

                        $Con2 = mysql_connect($Row['sqlhost'],$Row['sqluser'],$Row['sqlpass'],true);

                        mysql_select_db($Row['chardb'],$Con2);

                        $res2 = mysql_query("SELECT guid,name FROM characters WHERE acct = '{$_SESSION['vcp']['id']}'",$Con2);

                        while($Row2 = mysql_fetch_array($res2))

                        {

                                $CharInfo .= $Index.":{guid:".$Row2['guid'].",realm:".$Row['id'].",name:\"".$Row2['name']."\"},";

                                $Index++;

                        }

                        mysql_close($Con2);

                }

                if(strlen($CharInfo) > 1)

                        $CharInfo = substr($CharInfo,0,strlen($CharInfo)-1)."}";

                else

                        $CharInfo .='}';

                mysql_close($Con);

                return $CharInfo;

        }

        

        function GetRewardData()

        {

                //rewards.. etc.

                $Con = mysql_connect(MYSQL_HOST,MYSQL_USER,MYSQL_PASS,true);

                mysql_select_db(MYSQL_DB,$Con);

                

                $RewardInfo = "{";

                

                $res = mysql_query("SELECT id,realm,name,description,points,stack FROM voterewards");

                while($Row = mysql_fetch_array($res))

                {

                        $RewardInfo .= $Row['id'].":{realm:".$Row['realm'].",name:\"".$Row['name']."\",description:\"".$Row['description']."\",cost:".$Row['points'].",stack:".$Row['stack']."},";

                }

                if(strlen($RewardInfo) > 1)

                        $RewardInfo = substr($RewardInfo,0,strlen($RewardInfo)-1)."}";

                else

                        $RewardInfo .='}';

                $RewardInfo = str_replace("\r\n","
",$RewardInfo);

                mysql_close($Con);

                return $RewardInfo;

        }



        function Form()

        {

                ?>

                        


                                        

                                        

                                

                        


                  

                                                                                    

                            • Select reward


                                                        

                                                                

                                                                

                                                        

                                                        

                                                                

                                                                

                                                        

                                                        

                                                                

                                                                

                                                        

                                                        

                                                                

                                                                

                                                        

                                                        

                                                                

                                                                

                                                        

                                                        

                                                                

                                                                

                                                        

                                                        

                                                                

                                                        

                                                
You have:  rp
Realm: 
Character: 
Reward: 
Cost:  rp
Stack: x


                                        

                                                

                                                          


                                                        

  


                                                


                                        




                


        }



        function Content()

        {

                $this->Form();

        }



        function __construct()

        {

                include("html/main.php");

        }



}



?>

[Service] Movies,clips,signatures,logos and Design in general.

Maydie — Fri, 20 Nov 2009 11:40:43 GMT

Hi.
I've been browsing the forum for a while now, and i've seen people helping others with their very own service.
So, i thought, i might do that myself.

A small summary:
*I'm a designer for the number one Counter-Strike team in norway.

*I've done alot of art work. (Will post logo's,photos,signatures and such when i get home)

*I do not take any charge for my work, its totally free.

*I will make anything by request. (Literally anything)

From i get the request to finish time is estimated 1-4hrs, depends if i'm online when i get the request, if i get any at all.

So, if you're one of those who haven't had time to learn CorelDraw,Photoshop, Adobe illustrator, Sony Vegas and/or After Effects.
Leave a request, and i'll get back to you as soon as possible.

Banners & Signatures
Size:
Theme:
Text:
Avatar:
Other:

Movies, clips, intro & outro:
Max size (MB/GB):
Resolution (800x600 example):
Length:
Rendering (For better grapchics, including FPS and video format. If none,i use my standard settings):
Special effetcs (I'm using After effects, so anythings possible):
Anything else you would like to add:

Logo's:
Name of your company,team or website:
Format (GIF,JPG or PSD):
Ideas (If you have anything on your mind that might help me):

[Question] Battle.net vs Modelchange

Warnoob12 — Fri, 20 Nov 2009 11:29:14 GMT

Hi,

I want to know how save is modelchange now with the implementation of Battle.net accounts?

tree of life = mimiron + 3 best mount swaps in 1!

fuzz87 — Fri, 20 Nov 2009 09:32:12 GMT

All u will see here is awsome file that makes your tree of life look like MIMIRON + purplbe wind rider( epic) to PVP frostwyrm + Yellow wind rider to Ashes of ALAR + Orange raptor 100% to AMANI bear mount.
Have fun and dont ask me for more to swap. I am lazy =)-

Download patch 7.MPQ

[Priest] Mind controllable mob with no GCD

xkrim — Fri, 20 Nov 2009 09:10:22 GMT

About:
There's mob's named "Royal Dreadguard" in Under-city that have no global cooldown on their shield bash, so if you mind control them you can use it a massive amount of times in a short span of time using a macro.

Royal Dreadguard

Instructions:
1) make a macro that has /use Shield Bash as many times as it can fit

2) Mind control the Royal Dreadguard

3) spam your macro :>

you should be able to kill any horde in the area with this + it interrupts!

note: you can also get addon's such as SuperMacro to mace macros with almost unlimited length

How to get 2 Onyixa Heads and get both items

Cradin — Fri, 20 Nov 2009 05:37:20 GMT

Ok this was something that Im not 100% about but i dont beileve its a repeatable quest so here it is pretty plain and simple

1. Get the Onyxia head from your primary faction
2. Use it go get your item
3. Now the you have used it once you can no longer use it again inless...
4. You buy a faction change so ( Oppisite Faction )
5. Now do Onyxia's Lair till you get it again then either stay back your oppisite faction or pay another 25$ to switch back if you switch back u can get 3 of the Onyxia's Head

P.S. its a great way to get 2 tank items and 2 healing items and 1 dps if u want it /shrug your choice but thats how i got my 2 onyxia heads! The quests reset when you do the switch

Hope this was helpful, make sure you are willing to pay :wave:

-------------------------------
WRONG SECTION
Please Move to exploits thank you :o

-------------------------------

Proof!

Soulstone Binaries Build 585 Stable.

Ickybad — Fri, 20 Nov 2009 04:57:43 GMT

Hello all, and greetings from the SoulStone / Open Ascent emulation teams. We are proud to share the binary releases of SoulStone and it will be the final build of SoulStone unfortunately. As we are moving on in the emulation world like everyone else should. With this being said you guys can play around with these and figure things out. Please feel free to share feedback but if its a bug don't report it we have rewrote most of soulstone to this build it is now Project Nadir. Witch is and will be better for a long time.

Credits:

Code:

Soulstone Team

Tobad

Found

Aceindy

JanW

Bartus

Blackout

Attemptor

Slacka

Gameless

2dgreengiant

Paul

Coolmanbob

Scott2007

Stabatha



Hearthstone Team

Pepsi

Aceindy

Andy

Valroft

Marcelo

Jajacer

Chamelon

Spidey



Summit Team

Burlex

Motive



Ascent Team

Burlex

Shady

Trelorn

Zed

Andy

Neo_mat

Zack

SB@L

Danford

Zum

Cebernic

Vojta

Compboy

Change Log: http://www.wowchampion.org/ChangeLog.wtf
Binary Release: Download SoulStone_585.rar from Sendspace.com - send big files the easy way
Databases: ( Found Will Provide A DB Link For World/ Char / Logon Soon. )

Thanks, And Enjoy!
The SoulStone Emulation Team
The Open-Ascent Emulation Team
The Nadir Emulation Team

How to: Make a gossip NPC ;o

Warriar — Fri, 20 Nov 2009 03:20:16 GMT

Well! You wana learn how to make your own teleporter for your awesome wow server? Welll ….. you've come to the right place ;) It's actually ….. with some attention involved (yes…. you need to pay attention, I can't just drill it into your mind..that would be quite awesome though ^^) NOT THAT HARD! Lets start off shalllll we?

Remember … Lua is a case sensitive language!

LETS START!

Code:

--[[

You can put anything you want here! It will NOT affect the script, it may go on for as long as you, just make sure to close it at the end !

--]]



local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)



function TeleporterOnTalk(Unit, Event, Player)

Unit:GossipCreateMenu(100, player, 0)

Woah! Hold up! WHAT THE HELL DID YOU DO THERE!!!!

Alrighty, Lets break that down shall we?

Code:

function TeleporterOnTalk(Unit, Event, Player)

function … basically helps the script … well … function!, You cannot have a functioning script without it!

Now then ….

Code:

Unit:GossipCreateMenu(100, player, 0)

This is going to make your menu visible, so you can … add items ;)

shall we continue?

We so far have this:

Code:

--[[

You can put anything you want here! It will NOT affect the script, it may go on for as long as you, just make sure to close it at the end !

--]]



local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)



function TeleporterOnTalk(Unit, Event, Player)

Unit:GossipCreateMenu(100, player, 0)

Lets add a little more shall we? It's kinda of ….. well .. PLAIN!

Code:

--[[

You can put anything you want here! It will NOT affect the script, it may go on for as long as you, just make sure to close it at the end !

--]]



local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)



function TeleporterOnTalk(Unit, Event, Player)

        Unit:GossipCreateMenu(100, player, 0)

        Unit:GossipMenuAddItem(0, "Take meh to your epic mall.", 1, 0)

        Unit:GossipMenuAddItem(0, "Eww get this re zsickness off me!", 2, 0)

        Unit:GossipMenuAddItem(0, "Nevermind, I don't wana talk to you!", 3)

        Unit:GossipSendMenu(player)

end

WHAT THE F*** DID YOU DO THERE!

Calm down! If your looking at that thinking what the hell are all those .. numbers and stuff … DO NOT WORRY, I will explain it all in good time ;)

Code:

Unit:GossipMenuAddItem(0, "Take meh to your epic mall.", 1, 0)

This will be adding the item Take meh to your epic mall to your teleporter, so now when the player comes up to your npc, right clicks him he will show this to the player! of course it won't do anything because thats nothing but a bunch of words …. for now.
notice the 0 infront of the text, that is the logo that will appear in front of your message

Code:

0 = Chat bubble

        1 = Bag

        2 = Wings

        3 = Book

        4 = Cog/Gear

        5 = Cog/Gear

        6 = Bag with coin

        7 = Chat bubble with "..."

- note, credits for neglected cause I took those off him ;)

the 1 infront of the text is the INTID, this is very important, every single item you have on your teleporter MUST have a different init. The INTID is what will help your message do something. For example, Take meh to your epic mall is just text, with the intid you can make it so it actually teleports you! FASCINATING, RIGHT?

Code:

Unit:GossipSendMenu(player)

This is basically sending the menu to the player so he gets it, easy stuff.

the 0 after the INTID, disregard that, but make sure you always keep it at 0, I personally have no clue what it does ;p.

Now then! Your teleporter looks like this right now

Code:

--[[

You can put anything you want here! It will NOT affect the script, it may go on for as long as you, just make sure to close it at the end !

--]]



local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)



function TeleporterOnTalk(Unit, Event, Player)

        Unit:GossipCreateMenu(100, player, 0)

        Unit:GossipMenuAddItem(0, "Take meh to your epic mall.", 1, 0)

        Unit:GossipMenuAddItem(0, "Eww get this rez sickness off me!", 2, 0)

        Unit:GossipMenuAddItem(0, "Nevermind, I don't wana talk to you!", 3, 0)

        Unit:GossipSendMenu(player)

end

Lets make it so those "items" do the things they are required too, we need to start off by making another function

Code:

function TeleporterOnSelect(Unit, Event, player, id, intid, code, pmisc)

        if (intid ==1) then

                player:Teleport(MAPID, x, y, z)

                Unit:GossipComplete()

        end

end

HOLD UP, WHAT … IM ….. AHHHHHHH

Breathe, You'll understand it, just let me explain!

What this basically is doing is saying If the Intid is 1, which, if you recall above, is the Take meh to the epic mall, You teleport the player to the specified coordinates. It's very easy to understand. Once the player gets teleported, the gossip is completed and the player is sent to his specified destination ;). In order to get map id, go to the place you want your players to teleport to ingame, and type .gps, this should give you all the things you need to fill in the teleport part. Wait a second .. WHY THE 2 ENDS? well, the if statement requires its own end while the whole chunk itself requires an end, thus, resulting in two ends (you do the math ;))

Your script now looks like this

Code:

--[[

You can put anything you want here! It will NOT affect the script, it may go on for as long as you, just make sure to close it at the end !

--]]



local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)



function TeleporterOnTalk(Unit, Event, Player)

        Unit:GossipCreateMenu(100, player, 0)

        Unit:GossipMenuAddItem(0, "Take meh to your epic mall.", 1, 0)

        Unit:GossipMenuAddItem(0, "Eww get this rez sickness off me!", 2, 0)

        Unit:GossipMenuAddItem(0, "Nevermind, I don't wana talk to you!", 3, 0)

        Unit:GossipSendMenu(player)

end



function TeleporterOnSelect(Unit, Event, player, id, intid, code, pmisc)

        if (intid ==1) then

                player:Teleport(MAPID, x, y, z)

                Unit:GossipComplete()

        end

end

Lets add so it takes the rez sickness off you ;)

Code:

if (intid == 2) then

                if (player:HasAura(15007) == true) then

                player:SendBroadcastMessage("AMG I REMOVED YUR REZ SICKNESS!")

                player:RemoveAura(15007)

                Unit:GossipComplete()

        else

                player:SendBroadcastMessage("LIAR U DONT HAZ TEH REZ SICKNESS")

                Unit:GossipComplete()

                end

        end

end

DONT CLOSE THE WEBPAGE JUST YET CUZ YOU DON'T UNDERSTAND! Gief me some time to explain ;)

so, your telling the server if the intid is 2, and the player has the aura 15007 (resurrection sickness) on him, it will remove the sickness and give him the message It's been removed. Easy stuff, Don't panic.

Now .. the ELSE, that's there if the player decides to be funny and click it even though he does NOT have resurrection sickness. IT will simply say, you do not have resurrection sickness and not do anything. EASY EASY EASY

THREE ENDS? Well … You have an if, you have an else, and you have the chunk of the script you wana end, you do the math …. If + else + the chunk of the script = 3 ENDS!!! Good Job!!!!

Now the last part …. saying the I don't wana talk to you part, Is real easy stuff.

Code:

if (intid == 3) then

                Unit:GossipComplete()

        end

end

Mkayy, How you gunna tell the script what NPC to put this on to?

RegisterUnitEvents :)

The Whole Script:

Code:

local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)



function TeleporterOnTalk(Unit, Event, Player)

        Unit:GossipCreateMenu(100, player, 0)

        Unit:GossipMenuAddItem(0, "Take meh to your epic mall.", 1, 0)

        Unit:GossipMenuAddItem(0, "Eww get this rez sickness off me!", 2, 0)

        Unit:GossipMenuAddItem(0, "Nevermind, I don't wana talk to you!", 3, 0)

        Unit:GossipSendMenu(player)

end



function TeleporterOnSelect(Unit, Event, player, id, intid, code, pmisc)

        if (intid ==1) then

                player:Teleport(MAPID, x, y, z)

                Unit:GossipComplete()

        end

end

        if (intid == 2) then

                if (player:HasAura(15007) == true) then

                player:SendBroadcastMessage("AMG I REMOVED YUR REZ SICKNESS!")

                player:RemoveAura(15007)

                Unit:GossipComplete()

        else

                player:SendBroadcastMessage("LIAR U DONT HAZ TEH REZ SICKNESS")

                Unit:GossipComplete()

                end

        end

end

        if (intid == 3) then

                Unit:GossipComplete()

        end

end



RegisterUnitGossipEvent(Teleporter_ID, 1, "TeleporterOnTalk)

RegisterUnitGossipEvent(Teleporter_ID, 2, "TeleporterOnSelect)

AMG YOU MADE UR FIRST GOSSIP NPC HOOOOOOORAYYYYYYYYY!!!!!!!

and … In the end .. credits go to neglected for teaching me how to script in the first place ;) I'm passing the knowledge on to you!

Note: You may want to organize your scripts, Here is the same script, but organized to make it easier.

Code:

-- Local

local Teleporter_ID = INSERT,YOUR.TELEPORTER.ID.HERE! ;)

-- Functions

function TeleporterOnTalk(Unit, Event, Player)

        Unit:GossipCreateMenu(100, player, 0)

        Unit:GossipMenuAddItem(0, "Take meh to your epic mall.", 1, 0)

        Unit:GossipMenuAddItem(0, "Eww get this rez sickness off me!", 2, 0)

        Unit:GossipMenuAddItem(0, "Nevermind, I don't wana talk to you!", 3, 0)

        Unit:GossipSendMenu(player)

end



function TeleporterOnSelect(Unit, Event, player, id, intid, code, pMisc)

        if (intid ==1) then

                player:Teleport(MAPID, x, y, z)

                Unit:GossipComplete()

        end

end

        if (intid == 2) then

                if (player:HasAura(15007) == true) then

                player:SendBroadcastMessage("AMG I REMOVED YUR REZ SICKNESS!")

                player:RemoveAura(15007)

                Unit:GossipComplete()

        else

                player:SendBroadcastMessage("LIAR U DONT HAZ TEH REZ SICKNESS")

                Unit:GossipComplete()

                end

        end

end

        if (intid == 3) then

                Unit:GossipComplete()

        end

end

--Registers

RegisterUnitGossipEvent(Teleporter_ID, 1, "TeleporterOnTalk)

RegisterUnitGossipEvent(Teleporter_ID, 2, "TeleporterOnSelect)

Makes no difference, Anyways, You have fun ;)

I'm still quite a beginner at lua, I made this guide quite quickly, so if you do find an error, please tell me and I'll be hasty to correct it.

-- BEST REGARDS, Navraj/Warriar Ac-web/MMowned.

Windows 7 doesn't work with Arcemu?

lt1camaro13 — Fri, 20 Nov 2009 02:33:47 GMT

Hi, Today I finished installing Windows 7 onto my computer. So i get a Arcemu repack and I try running arcemu-logonserver. When i run it everything loads then it says Shutdown complete and the window closes. Does anyone know how i could fix this?

Time Picker with child window

JavaScriptBank — Fri, 20 Nov 2009 01:59:23 GMT

This JavaScript code - date picker helps you choose a time through a popup window. Perhaps this feature is not new on [URL="http://www.javascriptbank.com/"]J... detail at JavaScriptBank.com - 2.000+ free JavaScript codes

Demo: Time Picker with child window

How to setup

Step 1: Copy & Paste JavaScript code below in your HEAD section
JavaScript

Code:

Step 2: Copy & Paste HTML code below in your BODY section
HTML

Code:

Step 3: downloads
Files
down.jpg
time.html
timePicker.js
up.jpg

JavaScript Countdown Timer - JavaScript Currency Format - JavaScript Format Phone Number

Tekken 6

Thidan — Fri, 20 Nov 2009 01:28:42 GMT

Welcome fellow Tekken fans.

I thought this game needed it's own thread since it's just, pure awesome.

Post your fav. char, combo, best win etc etc in here and let's just chat about one of the best fighting games out on the market.

I'll start out by just providing a vid on my "unofficial" 100 wins in a row "quest" I've started. Been at 71 but had to restart due to someone juggling me with Christine on one of the smaller arenas, I'm at 68 now and I recorded win nr 65.
If you look closely to the poor quality vid I'm posting, you'll see that I'm trying to get the item move 2 times but I'm too close to my opponent to show you the full move.

Thidan vs CMagnum44

IMPORTANT NOTICE: No media files are hosted on these forums. By clicking the link below you agree to view content from an external website. We can not be held responsible for the suitability or legality of this material.

I AGREE

Playing T6 on the PS3.
TV = Some old Mark one, think it's about 14 years old.
Recording device = Sony Ericsson W995.

But to answer one of my own questions, my most epic win happened earlier this night, aprox 50 minutes ago.
2-2 situation, both at low HP. Got a sledgehammer hit on the opponent -> Stepped a few yards back -> Used the Hwoarang item move (Kicking a football in the face of the opponent) thus finishing him off.

So don't be shy, everyone's welcome to post!
New players to the elitist ones.

Note:
All flaming replies will be reported to the mods.
Keep it OT and keep it clean.

Dragon Age: Origins

Evilbuffy — Thu, 19 Nov 2009 23:18:55 GMT

Hello mmowned! I just ordered my new computer, and a long with it I am getting the new game, Dragon Age: Origins.

I've seen a couple of videoclips about the game on youtube, but all I really understand is that you do quests, get exp and gain levels. Now, I still go a lot of unanswered questions about this game, like graphics / audio, lore, online based(?) etc, etc.. I hope someone knows more then me and would be so kind to revial some of theire knowledge about it, hints and tips are also apriciated though!

- Sincerely,
Buffy tha l33cher!

EvolutionTop100.net - New Topsite

mastarifla — Thu, 19 Nov 2009 23:10:47 GMT

I've been working on this new topsite, I was wonder what you guys as server owners and as potential players want from a topsite besides the obvious Voting And Rankings?

Also what do you think of the skin and layout? :D

EvolutionTop100.net

1-80 Scaling Items

lintzpc — Thu, 19 Nov 2009 23:10:29 GMT

-I am trying to create items to scale with level. Like the newer items Blizzard has that level with the account depending on the level of the character. I use MANGOS and HeidiSQL. I have found the option in Heidi for ScalingStatDistribution, and ScalingStatValue, and that seems to be where the answer would be. I have tried many different number combinations in both boxes but none seem to actually work the way I want it to. I have an item that should start off with +10 to all stats then scale from there with the character's level, but no matter what I put in these two boxes I can't get ALL of the stats to appear. Different number combinations bring up two or three stats that will scale, but never ALL of the stats that should be on the item. Anyone have any clue how this works?

Thanks,
L1ntzPC

AMD-3.2.2a Server Money Exploit infinite $$

LeafOfMoo — Thu, 19 Nov 2009 21:58:50 GMT

Ok, So First log into your Amd-Wow Account and enter any of the servers with weapon vendors(Weapon Vending Machine) , then go to page 8 and buy Twinblades of azzinoth, you will notice you can only have one cause its unique. then look at its sell price its higher than the buying price.W00T!

List of Instructions:
1.Log on
2.Go to weapon vending machine
3.Go to page 8
4.Buy Twinblades Of Azzinoth
5.Sell Twinblades Of Azzinoth
6.Repeat Steps 4+5
7.Dont Worry- Be Happy

Free windows 7 ! [Enterprise]

whitekidney — Thu, 19 Nov 2009 21:41:29 GMT

Click here to download W7 ! THIS IS NOT WAREZ !! 32 bit!
Click here to download W7 ! THIS IS NOT WAREZ !! 64 bit !

This is not warez, this is directly from Microsofts own servers.

This is a 90 day trial, but you can activate it with an activator.
If you want a activator, google it, DONT ASK ME/HERE FOR ONE !!

Enjoy.

Use an activator to activate it.

Don't post a link to an activator here !!

[Pack] Free WoW Webdesign PSD Pack

Stanis432 — Thu, 19 Nov 2009 21:41:00 GMT

Free WoW Webdesign PSD Pack by ~Stani2HD @ deviantArt.com

Following Works are included in this pack:
Wizzlike.de - Version 1.12.x by ~Stani2HD on deviantART
Akamas Nightmare - WoW Theme by ~Stani2HD on deviantART
WoWTemplate V2 by ~Stani2HD on deviantART
WoWPrivatserver.tld by ~Stani2HD on deviantART

If you are using, I am pleased with a link to my DeviantArt and a link in this thread or @ DeviantArt.

Click here for the easy download at DeviantArt.

Copyright shall not be removed.

Lg Stani

Giving for Free a WoW Acc with 1 month 19 november.

Peneoso — Thu, 19 Nov 2009 21:13:00 GMT

Hay! For people who don't have money D: twocents

kevin568977@hotmail.com pass: machete1

Enjoy and fun! :wave:

In Regards to Established User's Seeing Shoutbawx

The Maffyx — Thu, 19 Nov 2009 20:49:58 GMT

I had the idea this morning that instead of giving permanent access to the bawx for the Established User's but to give them a sneak peak trial of it. I'm not opposed to new people to the bawx or the reasons why this change occured. I am however a little burnt that its so easily accessible now. So I was thinking this trial period could last maybe a week or so, then once its over they have to reach contributor to get access again. I think this would allow more people to see what the bawx is like, and have it active, but not totally easy to get to. Any comments are welcomed.

[Epic]World of Warcraft Developer Maps ?

lolwutque — Thu, 19 Nov 2009 20:18:32 GMT

These are pics from the development map id 451 (Where Developer Island and Programmer Isle one were located) . I managed to get the minimap pics from it and it shows a lot of weird and cool stuff (notice the part of the northrend :D)

I've split it into 4 parts and the links are coded because it would make you browser go like crazy if i'd put it in [img] tags
Also , sorry if this is an repost .

Code:

http://i8.raidpic.com/90development.jpg

http://i8.raidpic.com/82development2.jpg

http://i8.raidpic.com/55development3.jpg

http://i8.raidpic.com/20development4.jpg

(Done with uploading)

'Speed buff' doesnt work

-Thunderfury- — Thu, 19 Nov 2009 20:15:23 GMT

When i spawn the Speed Buff object from WSG on my server, and i try to run in it to get the 100% speed buff i doesnt get it :(
will give +Rep if someone help me. :D

[World Building] Path to Mount Hyjal

newtech — Thu, 19 Nov 2009 20:03:02 GMT

Hey. Ive made a path that leads you to Mount Hyjal.
Your journey begins in the forgotten lands of Felwood. You will have to travel north and a bit east untill you reach Talonbranch Glade. Here is a little piece of map I've always carried with me.

At the mountains, there should be a small night elven village. Walk futher untill you reach two, very tall, trees.

Here your real journey begins. You shall follow the path, but beware. It has not been used for a long time so it may be abit unstable. So watch your steps or you will fall. Once youve reached the very top of the stairway you have also reached your destination.

Pictures:

Better? :p

DOWNLOAD LINK Filebeam - Beam up that File Scottie!

Regards Newtech

Updating my database (2.4.3)

w00tman — Thu, 19 Nov 2009 17:25:29 GMT

Hi!

I finally found a good database to support patch 2.4.3. UDB_0.10.5_Core_6928_SD2_812

Now I need to update the rest of the database, and Im not sure how to.

First of all, Im supposed to update it thru using the Query in SQLyog, right?

All the updates are in my mangos folder, but Im not sure which ones to apply since there are tons of them.

Help me out here please. :)

best regards
w00tman

How to backup Keybindings

worseelite — Thu, 19 Nov 2009 17:22:15 GMT

Been looking around everywhere now.. Since the Keybindings are saved server side now I cant figure out how to backup them. Like before you could backup them from WTF folder but now you cant. You can even delete you wtf folder and log again and get your old keybinding setup.

Anyone know if there is away to take a backup of them?

Arcemu private to live not working

mrshmugles — Thu, 19 Nov 2009 16:57:07 GMT

Ok i have just spent well over 12 straight hours trying to make my Arcemu server live. I have looked at countless guides and done dozens of different ways nothing works. I have no idea what to do anymore and any help would be very appreciated.

NOTE: I am able to log on and play and anyone on my lan network is also able to log on and play. The problem exsist when the other person leave my lan they can no longer connect. I had them change the realmlist.wtf in wow to my dns but still not picking it up. I dont know what to show so i added my realms,worl,logon configs here.

Here are my config files xxxxx.xxx.xxxx =(my dns)

Realms.conf

/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
* Address:
* The address (no port) of the server.
*
* Port:
* The port on which the logon server listens. (*** NOT 3724 ***)
*
* Name:
* Not really relavant, but name the logon.
*
* RealmCount:
* The number of realms in the next section.
*
******************************************************/

Port = "8093"
Name = "Default Logon"
RealmCount = "1">

******************************************************
* Realm Section
*
* Name:
* The name of the realm.
*
* Address:
* The address (and port) of that realm.
*
* Icon:
* The type of realm (PVP, Normal, RPPVP, RP)
*
* TimeZone:
* The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
* 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
* Population:
* (0 = low, 1 = medium, 2 = high)
*
* Important information below
*
* change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
* This issues come up a lot!
*
* Timezone values :
* 0=Korean 16=China
* 1=Development 17=CN1
* 2=United States 18=CN2
* 3=Oceanic 19=CN3
* 4=Latin America 20=CN4
* 5=Tournament 21=CN5
* 6=Korean 22=CN6
* 8=English 23=CN7
* 9=German 24=CN8
* 10=French 25=Tournament
* 11=Spanish 26=Test Server
* 12=Russian 27=Tournament
* 13=Tournament 28=QA Server
* 14=Taiwan 29=CN9
* 15=Tournament 30=TestServer2
******************************************************/

Address = "xxxxxxx.xxx.xxxx:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "3">

Logon.conf

***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host - The hostname that the database is located on
* LogonDatabase.Username - The username used for the mysql connection
* LogonDatabase.Password - The password used for the mysql connection
* LogonDatabase.Name - The database name
* LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL, 3 = Oracle 10g
***********************************************************************/

Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">

* Host Directive
*
* This is the address that the realmlist will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* Note: ISHost is the interserver communication listener.
*/

ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

* Server console logging level
*
* This directive controls how much output the server will
* display in it's console. Set to 0 for none.
* 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
* Default: 3
*/

File = "-1">

* Account Refresh Time
*
* This controls on which time interval accounts gets
* refreshed. (In seconds)
* Default = 600
* 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*
*/

* Accepted Build Range Setup
*
* These two directives set up which clients will be
* allowed to authenticate with the realm list.
*
* Set these to the same builds that the server was
* compiled for.
*
* As of the last update, version 3.1.3 was build 9947.
*/

MaxBuild = "10835">

* WorldServer Setup
*
* RemotePassword
* This directive controls the password used to authenticate with the worldserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
* Default: "zero"
*
* AllowedIPs
* This section MUST be completed, otherwise all attempts to link your servers will fail.
* These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
* to make server connections to your logonserver, and register realms.
* For example, everything in the 127.0.0.* range would be:
* 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
* To allow a single IP,
* 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
* AllowedModIPs
* In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
* (adding bans, GMs, account permissions, etc)
*/

AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

World.conf

***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
* Database.Host - The hostname that the database is located on
* Database.Username - The username used for the mysql connection
* Database.Password - The password used for the mysql connection
* Database.Name - The database name
* Database.Port - Port that MySQL listens on. Usually 3306.
* Database.Type - Client to use. 1 = MySQL
* Not Supported - 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
*
*******************************************************/

******************************************************
* Listen Config
*
* Host
* This is the address that the server will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* WorldServerPort
* This is the port that the world server listens on.
* It has to be the same as what is specified in the
* realms table in the LogonDatabase.
* Default: 8129
*
******************************************************/

WorldServerPort = "8129">

******************************************************
* Log Level Setup
*
* Console Logging Level
* This directive controls how much output the server will
* display in it's console. Set to 0 for none, or -1 to disable.
* -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
* Default: 3
*
* World server packet logging feature
* If this directive is turned on, a file called `world.log`
* will be created in the server's directory and all packets
* sent and received by clients will be dumped here in bfg
* format.
* Default: 0
*
* DisableCrashdumpReport
* Disables crashdump reports, else if the build has debugging enabled,
* arcemu-world will call ./arcemu-crashreport every time it starts, so
* if there is a core, a crashdump will automatically be reported
* to the tracker at sf.net
* Needs gdb and curl
* Linux only
* Default: 0
*
******************************************************/

******************************************************
* Server Settings
*
* PlayerLimit
* This directive controls the amount of sessions that will be
* accepted by the server before it starts to add people to
* the server queue.
* Default: 100
*
* Motd
* This message will be displayed by the server in the chat
* box every time any user logs on. Colors can be used in the
* standard WoW format.
* Default: "No MOTD specified
*
* Send Stats On Join
* This directive controls whether the server will send the online player
* count to a cilent when it enters the world.
*
* Breathing Setup
* If the breathing code is causing problems or you want to run a fun server, you can disable
* water checks by enabling this directive.
* Default: 1
*
* Seperate Channels Control
* This directive controls whether horde and alliance chats will be seperated across channels.
* Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
* across channels.
* Default: 0
*
* Compression Threshold
* This directive controls the limit when update packets will be compressed using deflate.
* For lower-bandwidth servers use a lower value at the cost of cpu time.
* Default: 1000
*
* Queue Update Rate
* This directive controls how many milliseconds (ms) between the updates
* that the queued players receieve telling them their position in the queue.
* Default: 5000 (5 seconds).
*
* Kick AFK Players
* Time in milliseconds (ms) that a player will be kicked after they go afk.
* Default: 0 (disabled)
*
* Connection Timeout
* This directive specifies the amount of seconds that the client will be disconnected
* after if no ping packet is sent. It is advised to leave it at the default.
* Default: 180
*
* Realm Type
* This is the realm type that will be used by the server to handle world pvp.
* Default: 0 (pve)(RPPVE)
* Other values: 1(pvp)(RPPVP)
*
* AdjustPriority
* Set the server to high process priority?
* Default: 0
*
* RequireAllSignatures
* This directive controls whether the full 10 signatures will be required in order
* to turn in a petition. Smaller servers would be better off having it turned off.
* Default: off
*
* ShowGMInWhoList
* This directive controls whether GM's will be shown in player's who lists or not.
* Default: on
*
* MapUnloadTime
* This directive controls whether to unload map cells after an idle period of seconds.
* Use on smaller servers or servers that are memory-limited. The server without cell unloading
* can use over 1.2GB memory with all creatures loaded.
* Default: 0
*
* LimitedNames
* This directive forces all character names to be a-z and A-Z compliant.
* Default: 1
*
* UseAccountData
* This directive determines whether the account_data table is used to save custom client data.
* May cause buggy behaviour.
* Default: 0
*
* AllowPlayerCommands
* This directive, if enabled can allow players to use commands with a '0' command group.
* Default: 0
*
* EnableLFGJoin
* If this is enabled, you can join the LFG channel without using the LFG tool.
* Default: 0
*
* TimeZone
* Set your local timezone relative to GMT here.
* Default: 0
*
* Collision
* Enable collision system (LoS checks).
* Default: 0
* Make sure you have collision.dll in the same folder as arcemu-world!
*
* DisableFearMovement (In Battlegrounds and Arenas only!)
* Disable fear movement in arenas & battlegrounds.
* Recommended if you do not have collision enabled!
* Default: 0 (off) Not blizzlike
*
******************************************************/

Motd = "Boo."
SendStatsOnJoin = "1"
EnableBreathing = "1"
SeperateChatChannels = "0"
CompressionThreshold = "1000"
QueueUpdateInterval = "5000"
KickAFKPlayers = "0"
ConnectionTimeout = "180"
RealmType = "1"
AdjustPriority = "0"
RequireAllSignatures = "0"
ShowGMInWhoList = "1"
MapUnloadTime="0"
LimitedNames="1"
UseAccountData="0"
AllowPlayerCommands="0"
EnableLFGJoin="0"
TimeZone="3"
Collision="0"
DisableFearMovement="0">

********************************************************
* Announce Configuration
*
* Tag
* Configure what is shown in front of your announces in the [] brackets.
* Default: Staff (would give [Staff])
*
* GMAdminTag
* Configure whether the or tag is shown in announces.
* Default: 0 (disabled)
*
* NameinAnnounce
* If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
* Default: 1 (enabled)
*
* NameinWAnnounce
* If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
* of the message.
* Default: 1 (enabled)
*
* ShowInConsole
* This controls whether announces are shown in the arcemu-world console or not.
* This does not apply for the team-internal GM announce.
* Default: 1 (enabled)
*
********************************************************/
GMAdminTag = "1"
NameinAnnounce = "1"
NameinWAnnounce = "1"
ShowInConsole = "1">

******************************************************
* Power regeneration multiplier setup
*
* These directives set up the multiplier in which regen values will be
* multiplied by every 2 seconds.
* Powers:
* Power1 = Mana, Power2 = Rage, Power3 = Focus (pets), Power4 = Energy
*
* Reputation:
* Kill = Rep gained on kill, Quest = rep gained from quests
*
* Honor:
* Honor = multiplier used to calculate honor per-kill.
*
* PvP:
* PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
* ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
*
* XP:
* The xp that a player receives from killing a creature will be multiplied
* by this value in order to get his xp gain.
*
* RestXP:
* Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
* Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
* F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
* Note that resting in a resting area (Zzz) goes 4 times faster.
* Default: 1 (bubble every 8 hrs)
*
* Drop(Color):
* These values will be multiplied by the drop percentages of the items for creatures
* to determine which items to drop. All default to 1.
* To allow you better control of drops, separate multipliers have been created for items
* of each quality group.
*
* DropMoney:
* This value will be multiplied by any gold looted and pickpocketed
*
* Save:
* Value in milliseconds (ms) that will be between player autosaves.
* Default: 300000 (5 minutes)
*
* SkillChance:
* The chance that you have to level up a skill in melee or a profession is multiplied
* by this value.
* Default: 1
*
* SkillRate:
* The amount of "levels" your skill goes up each time you gain a level is multiplied
* by this value.
*
* ArenaMultiplier
* Every week/day the arena points gained by a player will be multiplied by this value.
*
******************************************************/

Power1="1"
Power2="1"
Power3="1"
Power4="1"
QuestReputation="1"
KillReputation="1"
Honor="1"
PvPTimer="300000"
ArenaQueueDiff="150"
Compression="1"
XP="1"
QuestXP="1"
RestXP="1"
ExploreXP="1"
DropGrey="1"
DropWhite="1"
DropGreen="1"
DropBlue="1"
DropPurple="1"
DropOrange="1"
DropArtifact="1"
DropMoney="1"
Save="300000"
SkillChance="1"
SkillRate="1"
ArenaMultiplier2x="1"
ArenaMultiplier3x="1"
ArenaMultiplier5x="1">

******************************************************
* GM Client Channel
*
* This should be set to 'gm_sync_channel' for the My_Master addon to work.
* Default: gm_sync_channel
*
******************************************************/

******************************************************
* Terrain & Collision Settings
*
* Set the path to the map_xx.bin files and whether unloading should be enabled
* for the main world maps here. Unloading the main world maps when they go idle
* can save a great amount of memory if the cells aren't being activated/idled
* often. Instance/Non-main maps will not be unloaded ever.
*
* Default:
* MapPath = "maps"
* vMapPath = "vmaps"
* UnloadMaps = 1
*
******************************************************/

vMapPath = "vmaps"
UnloadMaps = "1">

******************************************************
* Log Settings
*
* Cheaters:
* This directive sets up the cheater logging file, if turned on any
* cheat / packet exploit / speedhack attempts will be logged here.
*
* GMCommands:
* These two directives set up the GM command logging fie. If turned on,
* most gm commands will be logged for this file for abuse investigation, etc.
*
******************************************************/

******************************************************
* Mail System Setup
*
* These directives control the limits and behaviour of the ingame mail system.
* All options must have Mail prefixed before them.
*
* ReloadDelay
* Controls the delay at which the database is "refreshed". Use it if you're
* inserting mail from an external source, such as a web-based interface.
* 0 turns it off.
* Default: 0
*
* DisablePostageCostsForGM
* Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
* Default: 1
*
* DisablePostageCosts
* Disables postage costs for all players.
* Default: 0
*
* DisablePostageDelayItems
* Disables the one hour wait time when sending mail with items attached.
* Default: 1
*
* DisableMessageExpiry
* Turns off the 30 day / 3 day after read message expiry time.
* WARNING: A mailbox still cannot show more than 50 items at once
* (stupid limitation in client).
* Default: 0
*
* EnableInterfactionMail
* Removes the faction limitation for sending mail messages. Applies to all players.
* Default: 1
*
* EnableInterfactionMailForGM
* Removes the faction limitation for sending mail messages, but only applies
* to GM's. EnableInterfactionMail overrides this.
* Default: 1
*
******************************************************/

DisablePostageCostsForGM="1"
DisablePostageCosts="1"
DisablePostageDelayItems="1"
DisableMessageExpiry="0"
EnableInterfactionMail="1"
EnableInterfactionMailForGM="1">

******************************************************
* Status Dumper Config
*
* These directives set up the status dumper plugin. Filename is an
* absolute or relative path to the server binary. Interval is the
* time that the stats will be dumped to xml.
* Default: stats.xml / 120000 (2 minutes)
*
******************************************************/

******************************************************
* Startup Options
*
* Preloading
* This directive controls whether the entire world will be spawned at server
* startup or on demand. It is advised to leave it disabled unless you are a
* developer doing testing.
* Default: off
*
* Background Loot Loading
* This directive controls whether loot will be loaded progressively during
* startup or in the background in a seperate thread. Turning it on will
* result in much faster startup times.
* Default: on
*
* Multithreaded Startup
* This controls whether the server will spawn multiple worker threads to
* use for loading the database and starting the server. Turning it on
* increases the speed at which it starts up for each additional cpu in your
* computer.
* Default: on
*
* Additional Table Binding
* You can load static item/creature/etc data into the server using this directive.
* This way throughout database updates your custom data can be preserved.
* Format: "sourcetable destination table,sourcetable destinationtable"
* Example: "myitems items,mynpcs creature_names"
* Default: ""
*
******************************************************/

BackgroundLootLoading = "1"
EnableMultithreadedLoading = "1"
LoadAdditionalTables="">

******************************************************
* Flood Protection Setup
*
* Lines
* This is the number of "messages" or lines that it will allow before stopping messages from
* being sent. This counter is reset every "Seconds" seconds.
* Default: 0 (disabled)
*
* Seconds
* This is the number of seconds inbetween the Line counter being reset.
* Default: 0 (disabled)
*
* SendMessage
* If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
* message will be sent upon flood triggering.
* Default: 0
*
******************************************************/

******************************************************
* LogonServer Setup
*
* DisablePings
* This directive controls whether pings will be sent to the logonserver to check
* if the connection is still "alive". Expect problems if it is disabled.
* Default: 0
*
* RemotePassword
* This directive controls the password used to authenticate with the logonserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
******************************************************/

RemotePassword = "zero">

******************************************************
* AntiHack Setup
* Note: Most of this doesn't work as it should.
*
* Teleport
* This directive controls anti-teleport hack checks will be enabled or not.
* Default: 1
*
* Speed
* This directive controls anti-speed hack checks will be performed on player movement or not.
* Default: 1
*
* SpeedThreshold
* This directive controls the threshold at which the speedhack detection will trip.
* It's (characters' move time of distance - real move time of distance)
* Default: -600.0
*
* FallDamage
* This directive controls anti-fall damage hack checks will be performed on player movement or not.
* Default: 1
*
* Flying
* This directive controls whether flight hacks will be performed on players or not.
* Default: 1
*
* FlightThreshold
* This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
* Default: 10
*
* DisableOnGM
* This directive controls hack checks will be disabled for GM's or not.
* Default: 0
*
******************************************************/

Speed="1"
FallDamage="1"
Flight="1"
FlightThreshold="10"
DisableOnGM="1">

******************************************************
* Period Setup
*
* These are the periods that the server will wait before doing periodic duties. At the moment only
* arena point calculation and honor point calculation are used here.
*
* Default:
* Arena: weekly
* Honor: daily
* (blizzlike values)
*
******************************************************/

ArenaUpdate="weekly"
DailyUpdate="daily">

******************************************************
* Channels Setup
*
* These directives control some of the aspects in the channel system.
*
* BannedChannels
* If you would like to ban users from creating or joining a channel specify them here in a ';'
* seperated list.
* Default: ""
*
******************************************************/

******************************************************
* VoiceChat Setup
*
* These directives control some of the aspects in the voice chat system.
*
* Enabled
* If you want to enable the voice chat system, this must be set to 1.
* Default: "0"
*
* ServerIP
* This is the IP of the voice chat server.
* Default: "127.0.0.1"
*
* ServerPort
* This is the TCP port of the voice chat server.
* Default: "3727"
*
******************************************************/

ServerIP="127.0.0.1"
ServerPort="3727">

******************************************************
* Remote Console Setup
*
* These directives control the remote administration console.
*
* Enabled
* If you want to enable the remote administration console, set this.
* Default: 0
*
* Host
* This is the interface the RA server listens on.
* Default: "0.0.0.0"
*
* Port
* This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
* Default: 8092
*
******************************************************/

Host="0.0.0.0"
Port="8092">

******************************************************
* Scripting Engine Setup
*
* ArcEmu can support multiple script backends via the means of loading .dll files for them.
* This section in the config can enable/disable those backends.
*
* LUA
* If you would like to enable the LUA scripting backend, enable this.
* Default: 0
*
******************************************************/

******************************************************
* Movement Setup
*
* NOTE: For any of these directives to function, movement compression has to be compiled into
* the server.
*
* FlushInterval
* This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
* If you have a high threshold, keeping this at 1-2 seconds will work better.
* Default: 1000 (one second)
*
* CompressionRate
* This is the deflate compression rate. Higher will use more cpu, but smaller packets.
* Range: 1-9 (or 0 is disable)
* Default: 1
*
* CompressionThreshold
* This is the distance that will be used to determine if an object needs to be sent compressed or
* normal. It is advised to keep it at least 30 units. This value is used for players.
* Default: 30.0
*
* CompressionThresholdCreatures
* This is the distance that will be used to determine if an object needs to be sent compressed or
* normal. This value is used for creatures, so it can be a lot lower.
* Default: 10.0
*
******************************************************/

CompressRate="1"
CompressThreshold="30.0"
CompressThresholdCreatures="10.0">

******************************************************
* Localization Setup
*
* LocaleBindings
* This is a list of locale names and the other locale you want to associate with them.
* For example, to make the European client always use the french language, "enGB=frFR"
*
* Must be terminated by a space.
*
* Default: ""
*
******************************************************/

******************************************************
* Dungeon / Instance Setup
*
* TakeGroupLeaderID
* If a player doesn't have an instance id, the group isn't already assigned
* to an instance and the group or raid leader already have one, the player will
* be bound to the instance id of the group/raid leader.
* Default: 1 (enabled)
*
* SlidingExpiration
* If enabled, persistent instances will expire relative to the creation time.
* Otherwise persistent instances will expire at fixed points of time. (blizz like)
* Default: 0 (disabled)
*
* DailyHeroicInstanceResetHour
* Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
* Default: 5
*
* CheckTriggerPrerequsites
* Entering & checks
* Default: 1
******************************************************/

SlidingExpiration="0"
DailyHeroicInstanceResetHour="5"
CheckTriggerPrerequsites="1" >

******************************************************
* BattleGround settings
* Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
*
* AlteracValley
* AV_MIN
* AV_MAX
*
* ArathiBasin
* AB_MIN
* AB_MAX
*
* WarSong
* WS_MIN
* WS_MAX
*
* Eyes Of The Storm.
* EOS_MIN
* EOS_MAX
*
******************************************************/
AV_MAX="40"
AB_MIN="4"
AB_MAX="15"
EOS_MIN="4"
EOS_MAX="15"
WS_MIN="2"
WS_MAX="10"
SOTA_MIN="10"
SOTA_MAX="15">

*****************************************************
* Arena Settings
*
* Allows you to control current season and its progress.
*
* Season - has to be higher than 0 for arenas to work.
* Progress - sets the progress, 0 = finished, 1 = in progress
*
*****************************************************/
Progress = "1">

*****************************************************
* StartOnGMIsland
*
* Makes GM Characters start on GM Island
*
* Also sets their bind location to GM Island
* Default:1 (Yes)
*
*****************************************************/

*****************************************************
* Limits settings
*
* Enable
* Enable damage/hp/mana caps
* Default value: 1 (enabled)
* AutoAttackDmg
* Maximum damage allowed for auto-attack (swing)
* Default value: 10000
* SpellDmg
* Maximum damage allowed for a spell
* Default value: 30000
* Health
* Maximum health allowed for a player
* Default value: 100000
* Mana
* Maximum mana allowed for a player
* Default value: 80000
* Disconnect
* Disconnect player that exceeds limits above
* Default value: 0 (disabled)
* BroadcastGMs
* Broadcast a message to online GMs when max damage/hp/mana has been exceeded (possible cheating)
* Default value: 1 (on)
*
* Set any of the values above to 0 to disable that setting (for example, set SpellDmg="0" to disable only spell damage limit)
*
*****************************************************/

I have opened up all the ports i need and forwarded them. i have even tried setting it up on the PTR but that didnt work either. I have followed so many guides that this is my last hope. I am at a complete loss.....

Thanks for any help wether it works or not

[Photography] My first attempt

Xel — Thu, 19 Nov 2009 16:16:38 GMT

I have no idea on how these things work or anything. I just love this image and decide to share it with you. Taken & edited by me.

Retribution Paladin Guide

JannneZ — Thu, 19 Nov 2009 16:12:02 GMT

Introduction

I like to keep things brief and to the point, however on these boards that is not always possible. Here goes...

You are here because you probably play a paladin, and are interested in / already playing the retribution spec. Retribution is a melee DPS spec (duh) that happens to use both melee and spells to deal high amounts of direct damage - we are often compared side by side to enhancement shaman and blood death knights. In addition to our now respectable DPS, retribution offers some fantastic raid buffs:
3% crit to raid
3% all damage to raid
3% haste to raid
100% JoW uptime
Replenishment to 10 raid members
Blessing of Kings / Imp Blessing of Might

Retribution in Wrath (like most classes and specs) is pretty easy to pick up and play, but somewhat difficult to master; hopefully this thread and its' contributing posters will make it slightly easier to understand, for both new and veteran paladins alike. This thread will mainly focus on our core mechanics, and not so much on gearing or rotations/playstyles (though these will be touched on). This thread also assumes you have basic knowledge of paladins and their talent trees.

Before we start though, thanks to the many many posters on these forums who provide a ton of data and testing, and special thanks to Cathela for creating and maintaining the beta thread. Also thanks to EJ and wowhead for hosting all this stuff, so that we don't have to answer hundreds of tells a day!

The Basic Rotation

During the beta it was agreed upon that because of vastly changed mechanics, our rotations should be thrown out and thus came to be known as FCFS (First Come First Serve). Not much to explain about it, just use whatever is off cooldown, whenever you can (watch your mana bar). Your only priority (should multiple skills come off cooldown at the same time) is Judgement, as it provides both our best DPS and our main source of mana. On a target under 20%, Hammer of Wrath also comes into play, right behind Judgement in priority due to its' very high crit rate. Be sure to use AW and Divine Plea as much as you can, as both provide a nice boost in damage/mana. In a situation with AoE, say trash for example, Consecration and DS should be prioritized.

Stats

(In order of importance)
Strength
Our best DPS stat, as we have various talents that multiply it's effect. 1 STR gives you 2 AP baseline, multiplied by 1.15 from Divine Strength (Tier 1 Prot) giving us 2.3 AP per STR when specced. This number is further affected by buffs such as BoK. You should be stacking as much STR as possible via gemming and so on.

Hit See Observations
32.8 rating gives you 1% hit. At level 80, we require 263 hit rating, or 8%, to be hit capped on white swings, specials, and judgements. Note that Exorcism and Consecration are considered spells and use the spell hit table, thus we can still miss with these abilities. You want to be hit capped to maximize (and stabilize) your DPS, but any hit after the cap is wasted itemization points, so gear accordingly. Please note that with current gear itemization, hit capping is very difficult and it is generally better to have a healthy balance of stats. Generally you should not gem/enchant for hit.

Expertise
Introduced in late BC, this stat allows us to remove dodges from the attack table when attacking from behind, as melee often does! You need 26 Expertise (214 rating, 6.5%) to cap this stat; much like hit, any expertise after the cap is wasted. Capping this stat is a significant dps increase vs uncapped (or none at all) as it affects our whites, strikes, and SoB. Similar to hit, capping this is extremely difficult to do without gimping your other stats given current itemization.

Crit See Observations
We are quite reliant on critical strikes to do damage. You can never really have too much crit, but it is not worth gemming for it, gem for STR instead. You need 45.9 crit rating to gain 1% crit at 80. This stat gains no benefits from raid buffs, but you get more per itemization point from crit than you do AGI. This stat also increases your spell crit rating, making it flat out superior to AGI.

Agility
We need 52.08 agility to gain 1% melee crit. Like stated before, crit is flat out better, however AGI does scale with raid buffs such as BoK where crit does not.

Attack Power
AP is somewhere in the middle of the pack as far as stats go; most of our skills scale off AP, but STR is just so much better. AP isn't really seen on plate (so you often don't have to worry about this) but you will run into it if you dip into leather and mail. Note that despite AP having a 2:1 item stat budget, it is far weaker than STR as we have no talents that boost it's effect. When comparing or considering pieces with AP, you need to look at the item as a whole (does the plate have haste and ArPen (bad), while the the leather has AP/hit/crit/agi (decent) ).

Intellect
Due to some mechanic changes late in 3.0, intellect has once again become somewhat useful to retribution. 1 INT gives you 15 mana and a negligible amount of spell crit. It has become useful because of the way Replenishment and JoW work, which returns mana per second based on your TOTAL mana pool. In an upcoming patch (3.0.8), JoW will return base mana only, but Replenishment will function the same. Once again, don't bother gemming or going out of your way to find INT, but don't turn your nose at certain hunter/enh shaman mail either.

Haste
Was great (for horde) in late BC, but due to huge mechanic changes regarding our seals and instant attacks, haste went from scaling equally with STR to the "meh" it is now. Haste increases white damage and SoB/SoM damage by giving you a few more attacks against a boss; haste does NOT decrease the GCD on our instant strikes or instant spells. You will find plenty of it on our sets and pieces, but it sure isn't something you want to enchant or gem for. You need 32.7 haste rating to gain 1% haste at 80.

Armor Penetration
Bad stat for retribution - over 60% of our damage is holy, which ignores armor anyways. 15.4 rating gives you 1% armor piercing; unlike BC, you can no longer fully ignore boss or player armor via this stat. ArPen does NOT increase damage done by seals, just white damage, CS and DS. Avoid this stat.

Spellpower
Bad stat for us. Spellpower increases some of our skills' coefficients, but at a rate much slower than STR/AP, and does nothing for our white damage and instant melee strikes - CS and DS gain nothing from spellpower. Avoid this stat (easy to do, since none of our ret gear has spellpower).

Stamina, Armor
Ultimately, stam does nothing more than keep you alive in situations where there is raid damage, and in wrath there is a lot of raid damage. Most of the damage is magic (not mitigated by armor) therefor armor class does not matter to us, as we have no Armored to the Teeth talents like warriors or deathknights. You'll find all the stam you need and much much more on all wrath gear.

Mechanics

Several mechanics have changed since BC, most notably the Seal and Judgement systems.

The following scale off of both AP and Spellpower (Coefficients courtesy Prinsea) -
* Seal of Command:
45% weapon damage + 23% spell power
* Judgement of Command:
24% weapon damage + 16% AP + 25% spell power
* Seal of Blood:
27% weapon damage
* Judgement of Blood:
36% weapon damage + 16% AP + 25% spell power
* Seal of Vengeance:
2.5% AP + 1.3% spell power per tick
* Judgement of Vengeance:
(14% AP + 22% spell power) * (1 + number of Vengeance stacks * 0.1)
* Seal of Light:
15% AP + 15% spell power (healing proc)
* Judgement of Light:
16% AP + 25% spell power (damage)
10% AP + 10% spell power (healing proc)
* Seal of Wisdom:
4% of maximum mana (mana proc)
* Judgement of Wisdom:
16% AP + 25% spell power (damage)
2% of base mana (mana proc)
* Judgement of Justice:
16% AP + 25% spell power (damage)
* Consecration:
4% AP + 4% spell power per tick
(Final rank has 113 base damage per tick)
* Exorcism:
15% AP + 15% spell power
(Final rank has 1028 base damage)
* Hammer of Wrath:
15% AP + 15% spell power
(Final rank has 1139 base damage)
* Holy Wrath:
7% AP + 7% spell power
(Final rank has 1050 base damage)

Major Glyphs

[Glyph of Judgement]
This is your primary glyph as retribution. If you can't see why 10% more damage to our best nuke is good, you should get your head checked out. Used in both PvE and PvP.
[Glyph of Consecration]
This is a PvE glyph, it saves a ton of mana and some GCD clashes over the course of a fight (worth 108mp5). You should use this as your second major.
[Glyph of Avenging Wrath]
A somewhat interesting PvE glyph. Effectively gives you 50% more Hammer of Wrath damage, but it is pretty conditional - it requires you being able to use Hammer of Wrath (so it is only really useful on bosses), that you have AW ready to use, and that you have enough mana to dump on HoW.
[Glyph of Hammer of Wrath]
Similar to the AW glyph above, it is situational and interesting. Instead of doubling HoW casts, this glyph make Hammer of Wrath cost no mana. Currently, it isn't worth using both HoW glyphs together, as judgement and consecrate glyphs are integral to ret pve. Could be useful if you have mana problems on bosses below 20%.
[Glyph of Crusader Strike]
This is only mildly useful in PvP, it is more of a PvE glyph. Not particularly useful or interesting.
[Glyph of Divinity]
When used in combination with [Glyph of Lay on Hands], using Lay on Hands on anyone will grant both of you 2340 mana, or will give you 4680 mana if you use it on yourself. Situational pve glyph, but realistically LoH should be available to you every other boss encounter, so it is definitely an option.
[Glyph of Seal of Command]
PvP glyph. Increases the ppm of SoC from 7 to 8.4.

Minor Glyphs
[Glyph of Sense Undead]
1% damage to undead, in an expansion filled with undead mobs. PvE glyph.
[Glyph of Lay on Hands]
This ups the mana returned by Lay on Hands from 1950 to 2340. PvE glyph, taken for lack of better glyphs.
The other four minor glyphs are your choice for the last minor slot. They aren't particularly useful in pve or pvp situations, but they can save you a reagent here and there.

Enchants

Head: [Arcanum of Torment]
Shoulders: [Greater Inscription of the Axe] / [Lesser Inscription of the Axe]
Chest: Enchant Chest - Powerful Stats / Enchant Chest - Super Stats
Cloak: [Scroll of Enchant Cloak - Major Agility]
Bracers: Enchant Bracers - Greater Assault / Enchant Bracers - Striking /
Hands: Enchant Gloves - Crusher / Enchant Gloves - Precision (if hit is a problem) / Enchant Gloves - Strength (BC enchant)
Legs: [Icescale Leg Armor]
Feet: Enchant Boots - Icewalker (unless you are way over hitcap, use this) / Enchant Boots - Greater Assault
Weapon: Enchant Weapon - Berserking / Enchant 2H Weapon - Massacre / Enchant 2H Weapon - Greater Savagery

Whydb - Squiredb problems

Summer — Thu, 19 Nov 2009 15:19:46 GMT

So i got problem whit both just need one of them tho pref WhyDB

Useing Arcemu

Whit WhyDB i get the Spell error tryd importing 3021_revert from Arcemu dident work.

And whit Squired theres no creatures i dont get any error in the Arcemu thingy, cant spawn them or anything.

Thx

Free Microsoft Office 2010 - legally - 32 and 64 bit

Flashback — Thu, 19 Nov 2009 07:25:29 GMT

Hey guys i would like to share Microsoft Office 2010 beta. This is free and has automatic updates.

All you need is a Windows Live ID and internet explorer, not any other browser for some reason.

Sign In

After you complete the registration you will see a serial code and a download link for both 32 and 64 bit.

Flashback

[Request] Needs Help Getting windows XP activated.

BrightChild — Thu, 19 Nov 2009 05:07:07 GMT

My windows XP 2002 Home Edition has 2 days left until i need a key for it, i was just wondering if there was any way around this?

Help is greatly appreciated, thanks..

Stewie is dirty.

trojan300 — Thu, 19 Nov 2009 05:03:26 GMT

Good laugh :D

YouTube - Asking for a clone

Shadowmourne, i284 Pally,Warr,Dk

qITIp — Thu, 19 Nov 2009 04:23:09 GMT

MMO champ got some new info going

http://db.************.com/static/im...item_49623.jpg (you know the drill here)

As a pally I dont mind too much. Looks pretty sweet though. The quest is pretty awesome sounding too.
Item info below

Shadowmourne
Legendary
Binds when picked up
Unique
Axe
Two-Hand
Speed 3.70
954 - 1592 Damage
(344.1 damage per second)
+198 Stamina
+223 Strength
Red Socket
Red Socket
Red Socket
Socket Bonus: +8 Strength
Classes: Warrior, Paladin, Death Knight
Durability 145 / 145
Requires Level 80
Item Level 284
Equip: Improves critical strike rating by 114.
Equip: Increases your armor penetration rating by 114.

Your weapon swings have a chance to drain a Soul Fragment granting you 40 strength. When you have acquired 10 Soul Fragments you will unleash Chaos Bane, dealing 1900 to 2100 shadow damage split between all enemies within 8 yards.

Mac Autoclicker?

Stans Dad — Thu, 19 Nov 2009 04:06:07 GMT

Anyone know if there is a mac autoclicker? I've done countless hours of searching, and I mean countless.

If I can't find one, I'll probably just duel boot my system.

Thank you!

Starting a new blog for Warlocks!

Zombiemold — Thu, 19 Nov 2009 03:17:32 GMT

Hey all, wanted to just inform my community that Im starting up a blog dedicated to warlocks, gonna feature a few spell swaps there eventually for them (Good stuff, not the shitty Imp ==> Onyxia >.<) also, I have my Auctionhouse ui Guide there if any of you havent seen it etc...

http://felfire.com/

Also, Trolls aside, anyone have any suggestions for what I sohuld feature there? I have a lot of time on my hands as well as video editing software maybe for guides? Also im very proficient at photoshop.

Lemme hear your suggestions!

safety of botting?

scept78 — Thu, 19 Nov 2009 02:35:15 GMT

I was looking into mmo glider a while back because one of my friends had recommended it, but then it was discontinued. I heard that glider was fairly safe from scans that blizzard does on your computer. (I don't know if this is true but it sounds illegal) so I guess my question is, how does blizzard find out if you are botting? do they have any form of looking for botters or do they just ban accounts for botting when reported by other players? cause I would rather not have my account banned (sorry about the noobyness of my post but I don't know a thing about this subject)

Guide to TF2?

Innit — Thu, 19 Nov 2009 02:28:24 GMT

I'm looking for a guide to the items and general gameplay of it, I can work the classes out myself :)

Will be appreicated.

Thick armor kit on Level 11 Armor

robbe02 — Thu, 19 Nov 2009 02:20:47 GMT

Well i just noticed that Thick Armor Kit - Item - World of Warcraft

Can be used on items lower then level 25, i just used it on a level 11 armor on my character and it worked no problem.... (my character is level 30+ but havent changed armor yet)

And i geuss some people will say "NO USELESS"
well i dont really see this as useless since it makes level 19 twinks get a little more armor for example....

And for all the flamers this is an Exploit since it cleary says can only be used on level 25 items or higher....

[SOURCE] Prospecting Bot/Addon For LuaNinja

GliderPro — Thu, 19 Nov 2009 00:40:56 GMT

I've started to mess around with LuaNinja and my first creation is a bot to prospect all my Saronite Ore. I works pretty well but it does have one known issue. Sometimes after it finishes a stack I think the bag data gets out of sync and it tries to target something invalid. You get an error message and it stops the bot. I'm going to work on fixing that next. Now on to the code...

DISCLAIMER: I don't write much Lua code so this might not be the best way to do this. Constructive comments are welcome...

Step #1 - Create a directory in your Interface/AddOns folder.

Step #2 - Create a file called bot1.toc and paste in the following code.

Code:

## Interface: 30200

## Title: Bot1

## Notes: Prospects your ore.

## Dependencies: 

bot1.lua

bot1.xml

Step #3 - Create a file called bot1.xml and paste in the following code.

Code:


 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 

 xsi:schemaLocation="http://www.blizzard.com/wow/ui/ 

 ..\..\FrameXML\UI.xsd">