[Guide] How to get rid of Connection to server errors on a private server. No hamachi -
08-30-2008
How to get rid of connection errors on a private server. No hamachi. Mangos Style.
To do this for localhost change all Ip addresses and host names to 127.0.0.1 (portforwarding isnt required, nor is getting a DynDNS). Some of the main causes of connection issues lie within portforwading, Configuration, and the server DNS.
Firstly if u haven't make yourself a DynDNS account at this site, there should be other guide which tell you how to do this. the site itself is [Only registered and activated users can see links. ].
Secondly all your ports should be forwarded correctly on your router. To modify your router setting you can type 192.168.1.1 (default for Linksys) into the Html bar. it should bring up a account/PW form to connect to your router by default it is usually admin, admin. Then go to [Only registered and activated users can see links. ] and look for your router there it should show you how to add ports too.
These are the ports to be forwarded. Turn off ALLLLL firewalls, they can usually block ports
Start to End
6112-6119
3724-3724
8085-8085
80-80
6881-6999
3036-3036
3306-3306
8129-8129
8093-8093
8050-8050
Thirdly and the most important Step your configuration. RED Means change
Go to your Navicat Database, and find the Realmlist table Make the Ip/host to External ip and port to 8085.
Then follow my codes for the rest>>>>>
realmd.conf
Code:
############################################
# MaNGOS realmd configuration file #
############################################
ConfVersion=2007062001
###################################################################################################################
# REALMD SETTINGS
#
# LoginDatabaseInfo
# Database connection settings for the realm server.
# Default: hostname;port;username;password;database
# .;somenumber;username;password;database - use named pipes at Windows
# Named pipes: mySQL required adding "enable-named-pipe" to [mysqld] section my.ini
# .;/path/to/unix_socket;username;password;database - use Unix sockets at Unix/Linux
# Unix sockets: experimental, not tested
#
# LogsDir
# Logs directory setting.
# Important: Logs dir must exists, or all logs be disable
# Default: "" - no log directory prefix, if used log names isn't absolute path then logs will be
# stored in current directory for run program.
#
# MaxPingTime
# Settings for maximum database-ping interval (minutes between pings)
#
# RealmServerPort
# Default RealmServerPort
#
# BindIP
# Bind Realm Server to IP/hostname
#
# PidFile
# Realmd daemon PID file
# Default: "" - do not create PID file
# "./realmd.pid" - create PID file (recommended name)
#
# LogLevel
# Server console level of logging
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 0
#
# LogTime
# Include time in server console output [hh:mm:ss]
# Default: 0 (no time)
# 1 (print time)
#
# LogFile
# Logfile name
# Default: "Realmd.log"
# "" - empty name disable creating log file
#
# LogTimestamp
# Logfile with timestamp of server start in name
# Default: 0 - no timestamp in name
# 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
# LogFileLevel
# Server file level of logging
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 0
#
# LogColors
# Color for messages (format "normal_color details_color debug_color error_color)
# Colors: 0 - BLACK, 1 - RED, 2 - GREEN, 3 - BROWN, 4 - BLUE, 5 - MAGENTA, 6 - CYAN, 7 - GREY,
# 8 - YELLOW, 9 - LRED, 10 - LGREEN, 11 - LBLUE, 12 - LMAGENTA, 13 - LCYAN, 14 - WHITE
# Default: "" - none colors
# "13 7 11 9" - for example :)
#
# UseProcessors
# Used processors mask for multi-processors system (Used only at Windows)
# Default: 0 (selected by OS)
# number (bitmask value of selected processors)
#
# ProcessPriority
# Process proirity setting (Used only at Windows)
# Default: 1 (HIGH)
# 0 (Normal)
#
# RealmsStateUpdateDelay
# Realm list Update up delay (updated at realm list request if delay expired).
# Default: 20
# 0 (Disabled)
#
# WrongPass.MaxCount
# Number of login attemps with wrong password before the account or IP is banned
# Default: 0 (Never ban)
#
# WrongPass.BanTime
# Duration of the ban in seconds (0 means permanent ban)
# Default: 600
#
# WrongPass.BanType
# Ban the IP or account on which login is attempted
# Default: 0 (Ban IP)
# 1 (Ban Account)
#
###################################################################################################################
LoginDatabaseInfo = "127.0.0.1;3306;MYSQL server name;MySQL PW;Name of database in your Navicat(or other) Normally realmd"
LogsDir = ""
MaxPingTime = 30
RealmServerPort = 3724
BindIP = "0.0.0.0"
PidFile = ""
LogLevel = 0
LogTime = 0
LogFile = "Realmd.log"
LogTimestamp = 0
LogFileLevel = 0
LogColors = ""
UseProcessors = 0
ProcessPriority = 1
RealmsStateUpdateDelay = 20
WrongPass.MaxCount = 0
WrongPass.BanTime = 600
WrongPass.BanType = 0
###################################################################################################################
# CUSTOM OPTIONS - ImpConfig - [Only registered and activated users can see links. ]
#
# Client Builds:
#
# MinBuild
# The minium client build allowed to connect
#
# MaxBuild
# The maximum client build allowed to connect
#
###################################################################################################################
MinBuild = 8820
MaxBuild = 8820
Mangos.conf
Code:
#####################################
# MaNGOS Configuration file #
#####################################
ConfVersion=2008080101
###################################################################################################################
# CONNECTIONS AND DIRECTORIES
#
# RealmID
# RealmID must match the realmlist inside the realmd database
#
# DataDir
# Data directory setting.
# Important: DataDir needs to be quoted, as it is a string which may contain space characters.
# Example: "@prefix@/share/mangos"
#
# LogsDir
# Logs directory setting.
# Important: Logs dir must exists, or all logs need to be disabled
# Default: "" - no log directory prefix, if used log names isn't absolute path
# then logs will be stored in current directory for run program.
#
#
# LoginDatabaseInfo
# WorldDatabaseInfo
# CharacterDatabaseInfo
# Database connection settings for the world server.
# Default: hostname;port;username;password;database
# .;somenumber;username;password;database - use named pipes at Windows
# Named pipes: mySQL required adding "enable-named-pipe" to [mysqld] section my.ini
# .;/path/to/unix_socket;username;password;database - use Unix sockets at Unix/Linux
# Unix sockets: experimental, not tested
#
# MaxPingTime
# Settings for maximum database-ping interval (minutes between pings)
#
# WorldServerPort
# Default WorldServerPort
#
# BindIP
# Bind World Server to IP/hostname
#
###################################################################################################################
RealmID = 1
DataDir = "."
LogsDir = ""
LoginDatabaseInfo = "127.0.0.1;3306;MYSQL server name;MySQL PW;Name of database in your Navicat(or other) Normally realmd"
WorldDatabaseInfo = "127.0.0.1;3306;MYSQL server name;MySQL PW;Name of database in your Navicat(or other) Normally mangos"
CharacterDatabaseInfo = "127.0.0.1;3306;MYSQL server name;MySQL PW;Name of database in your Navicat(or other) Normally character"
MaxPingTime = 30
WorldServerPort = 8085
BindIP = "0.0.0.0"
###################################################################################################################
# PERFORMANCE SETINGS
#
# UseProcessors
# Used processors mask for multi-processors system (Used only at Windows)
# Default: 0 (selected by OS)
# number (bitmask value of selected processors)
#
# ProcessPriority
# Process proirity setting (Used only at Windows)
# Default: 1 (HIGH)
# 0 (Normal)
#
# Compression
# Compression level for update packages sent to client (1..9)
# Default: 1 (speed)
# 9 (best compression)
#
# TcpNoDelay
# TCP Nagle algorithm setting
# Default: 0 (enable Nagle algorithm, less traffic, more latency)
# 1 (TCP_NO_DELAY, disable Nagle algorithm, more traffic but less latency)
#
# PlayerLimit
# Maximum number of players in the world. Excluding Mods, GM's and Admins
# Default: 100
# 0 (for infinite players)
# -1 (for Mods, GM's and Admins only)
# -2 (for GM's and Admins only)
# -3 (for Admins only)
#
# SaveRespawnTimeImmediately
# Save respawn time for creatures at death and for gameobjects at use/open
# Default: 1 (save creature/gameobject respawn time without waiting grid unload)
# 0 (save creature/gameobject respawn time at grid unload)
#
# MaxOverspeedPings
# Maximum overspeed ping count before player kick (minimum is 2, 0 used for disable check)
# Default: 2
#
# GridUnload
# Unload grids (if you have lot memory you can disable it to speed up player move to new grids second time)
# Default: 1 (unload grids)
# 0 (do not unload grids)
#
# SocketSelectTime
# Default socket select time (in milliseconds)
#
# GridCleanUpDelay
# Default grid clean up delay (in milliseconds)
#
# MapUpdateInterval
# Default map update interval (in milliseconds)
#
# ChangeWeatherInterval
# Default weather update interval (in milliseconds)
#
# PlayerSaveInterval
# Default PlayerSaveInterval (in milliseconds)
#
# vmap.enableLOS
# vmap.enableHeight
# Enable/Disable VMmap support for line of sight and height calculation
# Default: 1 (true)
# 0 (false)
#
# vmap.ignoreMapIds
# Map id that will be ignored by VMaps
# List of ids with delimiter ','
# If more then one id is defined and spaces are included, the string has to be enclosed by "
# Example: "369,0,1,530"
#
# vmap.ignoreSpellIds
# These spells are ignored for LoS calculation
# List of ids with delimiter ','
#
# DetectPosCollision
# Check final move position, summon position, etc for visible collision with other objects or
# wall (wall only if vmaps are enabled)
# Default: 1 (enable, required more CPU power usage)
# 0 (disable, less nice position selection but will less CPU power usage)
#
# TargetPosRecalculateRange
# Max distance from movement target point (+moving unit size) and targeted object (+size)
# after that new target movmeent point calculated. Max: melee attack range (5), min: contact range (0.5)
# More distance let have better performence, less distance let have more sensitive reaction at target move.
# Default: 1.5
#
# UpdateUptimeInterval
# Update realm uptime period in minutes (for save data in 'uptime' table). Must be > 0
# Default: 10 (minutes)
#
# MaxCoreStuckTime
# Periodically check if the process got freezed, if this is the case force crash after the specified
# amount of seconds. Must be > 0. Recommended > 10 secs if you use this.
# Default: 0 (Disabled)
#
# AddonChannel
# Permit/disable the use of the addon channel through the server
# (some client side addons can stop work correctly with disabled addon channel)
# Default: 1 (permit addon channel)
# 0 (do not permit addon channel)
#
###################################################################################################################
UseProcessors = 0
ProcessPriority = 1
Compression = 1
TcpNoDelay = 0
PlayerLimit = 500
SaveRespawnTimeImmediately = 1
MaxOverspeedPings = 2
GridUnload = 1
SocketSelectTime = 10000
GridCleanUpDelay = 300000
MapUpdateInterval = 100
ChangeWeatherInterval = 600000
PlayerSaveInterval = 900000
vmap.enableLOS = 0
vmap.enableHeight = 0
vmap.ignoreMapIds = "369"
vmap.ignoreSpellIds = "7720"
DetectPosCollision = 1
TargetPosRecalculateRange = 1.5
UpdateUptimeInterval = 10
MaxCoreStuckTime = 0
AddonChannel = 1
###################################################################################################################
# SERVER LOGGING
#
# LogSQL
# Enable logging of GM commands - all SQL code will be written to a log file
# All commands are written to a file: YYYY-MM-DD_logSQL.sql
# If a new day starts (00:00:00) then a new file is created - the old file will not be deleted.
# Default: 1 - Write SQL code to logfile
# 0 - Do not log
#
# PidFile
# World daemon PID file
# Default: "" - do not create PID file
# "./worldd.pid" - create PID file (recommended name)
#
# LogLevel
# Server console level of logging
# 0 = Minimum; 1 = Basic&Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#
# LogTime
# Include time in server console output [hh:mm:ss]
# Default: 0 (no time)
# 1 (print time)
#
# LogFile
# Logfile name
# Default: "Server.log"
# "" - Empty name disable creating log file
#
# LogTimestamp
# Logfile with timestamp of server start in name
# Default: 0 - no timestamp in name
# 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
# LogFileLevel
# Server file level of logging
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 0
#
# LogFilter_TransportMoves
# LogFilter_CreatureMoves
# LogFilter_VisibilityChanges
# Log filters
# Default: 1 - not include with any log level
# 0 - include in log if log level permit
#
# WorldLogFile
# Packet logging file for the worldserver
# Default: "world.log"
#
# DBErrorLogFile
# Log file of DB errors detected at server run
# Default: "DBErrors.log"
#
# CharLogFile
# Character operations logfile name
# Default: "Char.log"
# "" - Empty name disable creating log file
#
# CharLogTimestamp
# Logfile with timestamp of server start in name
# Default: 0 - no timestamp in name
# 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
# CharLogDump
# Write character dump before deleting in Char.log
# For restoration, cut character data from log starting from
# line == START DUMP == to line == END DUMP == (without its) in file and load it using loadpdump command
# Default: 0 - don't include dumping chars to log
# 1 - include dumping chars to log
#
# GmLogFile
# Log file of gm commands
# Default: "" (Disable)
#
# GmLogTimestamp
# Logfile with timestamp of server start in name
# Default: 0 - no timestamp in name
# 1 - add timestamp in name in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#
# RaLogFile
# Log file of RA commands
# Default: "Ra.log"
# "" - Empty name for disable
#
# LogColors
# Color for messages (format "normal_color details_color debug_color error_color)
# Colors: 0 - BLACK, 1 - RED, 2 - GREEN, 3 - BROWN, 4 - BLUE, 5 - MAGENTA, 6 - CYAN, 7 - GREY,
# 8 - YELLOW, 9 - LRED, 10 - LGREEN, 11 - LBLUE, 12 - LMAGENTA, 13 - LCYAN, 14 - WHITE
# Default: "" - none colors
# Example: "13 7 11 9"
#
###################################################################################################################
LogSQL = 0
PidFile = ""
LogLevel = 0
LogTime = 0
LogFile = ""
LogTimestamp = 0
LogFileLevel = 0
LogFilter_TransportMoves = 0
LogFilter_CreatureMoves = 0
LogFilter_VisibilityChanges = 0
WorldLogFile = ""
DBErrorLogFile = ""
CharLogFile = ""
CharLogTimestamp = 0
CharLogDump = 0
GmLogFile = ""
GmLogTimestamp = 0
RaLogFile = ""
LogColors = ""
###################################################################################################################
# SERVER SETTINGS
#
# GameType
# Server realm style
# 0 = NORMAL;1 = PVP; 4 = NORMAL; 6 = RP; 8 = RPPVP
# also custom type: 16 FFA_PVP (free for all pvp mode like arena PvP in all zones except rest
# activated places and sanctuaries)
#
# RealmZone
# Server realm zone (set allowed alphabet in character names/etc). See also Strict*Names options.
#
# 1 Development - any language (Default)
# 2 United States - extended-Latin
# 3 Oceanic - extended-Latin
# 4 Latin America - extended-Latin
# 5 Tournament - basic-Latin at create, any at login
# 6 Korea - East-Asian
# 7 Tournament - basic-Latin at create, any at login
# 8 English - extended-Latin
# 9 German - extended-Latin
# 10 French - extended-Latin
# 11 Spanish - extended-Latin
# 12 Russian - Cyrillic
# 13 Tournament - basic-Latin at create, any at login
# 14 Taiwan - East-Asian
# 15 Tournament - basic-Latin at create, any at login
# 16 China - East-Asian
# 17 CN1 - basic-Latin at create, any at login
# 18 CN2 - basic-Latin at create, any at login
# 19 CN3 - basic-Latin at create, any at login
# 20 CN4 - basic-Latin at create, any at login
# 21 CN5 - basic-Latin at create, any at login
# 22 CN6 - basic-Latin at create, any at login
# 23 CN7 - basic-Latin at create, any at login
# 24 CN8 - basic-Latin at create, any at login
# 25 Tournament - basic-Latin at create, any at login
# 26 Test Server - any language
# 27 Tournament - basic-Latin at create, any at login
# 28 QA Server - any language
# 29 CN9 - basic-Latin at create, any at login
#
# Expansion
# Allow server use expansion content
# Default: 1 - check expansion maps existence, and if client support expansion and account have
# expansion setting then allow visit expansion maps, allow create new races character)
# 0 - not check expansion maps existence, not allow wisit its, not allow create new race
# characters, ignore account expansion setting)
#
# DBC.Locale
# DBC Language Settings
# 0 = English; 1 = Korean; 2 = French; 3 = German; 4 = Chinese; 5 = Taiwanese; 6 = Spanish; 7 = Spanish Mexico
# 8 = Russian; 255 = Auto Detect (Default)
#
# StrictPlayerNames
# Limit player name to language specific symbols set, not allow create characters, and set rename request and disconnect at not allowed symbols name
# Default: 0 disable (but limited server timezone dependent client check)
# 1 basic latin characters (strict)
# 2 realm zone specific (strict). See RealmZone setting.
# Note: In any case if you want correctly see character name at client this client must have apporopriate fonts
# (included in client by default, with active official localization or custom localization fonts in clientdir/Fonts).
# 3 basic latin characters + server timezone specific
#
# StrictCharterNames
# Limit guild/arena team charter names to language specific symbols set, not allow create charters with allowed symbols in name
# Default: 0 disable
# 1 basic latin characters (strict)
# 2 realm zone specific (strict). See RealmZone setting.
# Note: In any case if you want correctly see character name at client this client must have apporopriate fonts
# (included in client by default, with active official localization or custom localization fonts in clientdir/Fonts).
# 3 basic latin characters + server timezone specific
#
# StrictPetNames
# Limit pet names to language specific symbols set
# Default: 0 disable
# 1 basic latin characters (strict)
# 2 realm zone specific (strict). See RealmZone setting.
# Note: In any case if you want correctly see character name at client this client must have apporopriate fonts
# (included in client by default, with active official localization or custom localization fonts in clientdir/Fonts).
# 3 basic latin characters + server timezone specific
#
# SkipCinematics
# Disable in-game script movie at first character's login(allows to prevent buggy intro in case of custom start location coordinates)
# Default: 0 - show intro for each new characrer
# 1 - show intro only for first character of selected race
# 2 - disable intro show in all cases
#
# MaxPlayerLevel
# Max level that can be reached by player for experience (in range from 1 to 255).
# Change not recommended
# Default: 70
#
# MaxHonorPoints
# Max honor points that player can have.
# Default: 75000
#
# MaxArenaPoints
# Max arena points that player can have.
# Default: 5000
#
# StartPlayerLevel
# Staring level that have character at creating (in range 1 to MaxPlayerLevel)
# Default: 1
#
# StartDeathknightLevel
# The deathknight's starting level
# Default: 55
#
# StartPlayerGold
# The amount of gold players will start with
# Default: 0
#
# ActivateWeather
# Activate weather system
# Default: 1 (true)
# 0 (false)
#
# Battleground.CastDeserter
# Cast or not Deserter spell at player who leave battleground in progress
# Default: 1 (true)
# 0 (false)
#
# CastUnstuck
# Allow cast or not Unstuck spell at .start or client Help option use
# Default: 1 (true)
# 0 (false)
#
# Instance.IgnoreLevel
# Ignore level requirement to enter instance
# Default: 0 (false)
# 1 (true)
#
# Instance.IgnoreRaid
# Ignore raid requirement to enter instance
# Default: 0 (false)
# 1 (true)
#
# Instance.ResetTimeHour
# The hour of the day (0-23) when the global instance resets occur.
# Default: 4
#
# Instance.UnloadDelay
# Unload the instance map from memory after some time if no players are inside.
# Default: 1800000 (miliseconds, i.e 30 minutes)
# 0 (instance maps are kept in memory until they are reset)
#
# Quests.LowLevelHideDiff
# Quest level difference to hide for player low level quests:
# if player_level > quest_level + LowLevelQuestsHideDiff then quest "!" mark not show for quest giver
# Default: 4
# -1 (show all available quests marks)
#
# Quests.HighLevelHideDiff
# Quest level difference to hide for player high level quests:
# if player_level < quest_min_level - HighLevelQuestsHideDiff then quest "!" mark not show for quest giver
# Default: 7
# -1 (show all available quests marks)
#
# MaxPrimaryTradeSkill
# Max count that player can learn the primary trade skill.
# Default: 2
# Max : 10
#
# MinPetitionSigns
# Min signatures count to creating guild (0..9).
# Default: 9
#
# MaxGroupXPDistance
# Max distance to creature for group memeber to get XP at creature death.
# Default: 74
#
# MailDeliveryDelay
# Mail delivery delay time for item sending
# Default: 3600 sec (1 hour)
#
# SkillChance.Prospecting
# For prospecting skillup not possible by default, but can be allowed as custom setting
# Default: 0 - no skilups
# 1 - skilups possible
#
# Event.Announce
# Default: 0 (false)
# 1 (true)
#
# BeepAtStart
# Beep at mangosd start finished (mostly work only at Unix/Linux systems)
# Default: 1 (true)
# 0 (false)
#
# Motd
# Message of the Day. Displayed at worldlogin for every user ('@' for a newline).
#
# DeathknightCreationCheck
# Enable/disable the level check when creating a DK
# if enabled, DK cant be created until player have a lv 55+ character, this check is skiped too when StartPlayerLevel is higher then 55
# Default: 1 (enabled)
# 0 (disabled)
#
###################################################################################################################
GameType = 0
RealmZone = 8
Expansion = 1
DBC.Locale = 255
StrictPlayerNames = 0
StrictCharterNames = 0
StrictPetNames = 0
SkipCinematics = 0
MaxPlayerLevel = 80
MaxHonorPoints = 75000
MaxArenaPoints = 5000
StartPlayerLevel = 70
StartDeathknightLevel = 55
StartPlayerGold = 300
ActivateWeather = 1
Battleground.CastDeserter = 1
CastUnstuck = 1
Instance.IgnoreLevel = 0
Instance.IgnoreRaid = 0
Instance.ResetTimeHour = 4
Instance.UnloadDelay = 1800000
Quests.LowLevelHideDiff = 4
Quests.HighLevelHideDiff = 7
MaxPrimaryTradeSkill = 2
MinPetitionSigns = 9
MaxGroupXPDistance = 74
MailDeliveryDelay = 3600
SkillChance.Prospecting = 0
Event.Announce = 0
BeepAtStart = 1
Motd = "Welcome to Wotlk beta Sydney"
DeathknightCreationCheck = 1
###################################################################################################################
# PLAYER INTERACTION
#
# AllowTwoSide.Accounts
# Allow or not accounts to create characters in the 2 teams in any game type.
# Default: 0 (Not allowed)
# 1 (Allowed)
#
# AllowTwoSide.Interaction.Chat
# AllowTwoSide.Interaction.Channel
# AllowTwoSide.Interaction.Group
# AllowTwoSide.Interaction.Guild
# AllowTwoSide.Interaction.Trade
# AllowTwoSide.Interaction.Mail
# Allow or not common :chat(say,yell);channel(chat)group(join)guild(join);trade for players from
# different teams.
# Default: 0 (Not allowed)
# 1 (Allowed)
#
# AllowTwoSide.WhoList
# Allow or not show player from both team in who list.
# Default: 0 (Not allowed)
# 1 (Allowed)
#
# AllowTwoSide.AddFriend
# Allow or not adding friends from other team in friend list.
# Default: 0 (Not allowed)
# 1 (Allowed)
#
# TalentsInspecting
# Allow other players see character talents in inspect dialog (Characters in Gamemaster mode can
# inspect talents always)
# Default: 1 (allow)
# 0 (not allow)
#
###################################################################################################################
AllowTwoSide.Accounts = 0
AllowTwoSide.Interaction.Chat = 0
AllowTwoSide.Interaction.Channel = 0
AllowTwoSide.Interaction.Group = 0
AllowTwoSide.Interaction.Guild = 0
AllowTwoSide.Interaction.Trade = 0
AllowTwoSide.Interaction.Mail = 0
AllowTwoSide.WhoList = 0
AllowTwoSide.AddFriend = 0
TalentsInspecting = 1
###################################################################################################################
# CREATURE SETTINGS
#
# Rate.Creature.Aggro
# Aggro radius percent or off.
# Default: 1 - 100%
# 1.5 - 150%
# 0 - off (0%)
#
# CreatureFamilyAssistenceRadius
# Creature family assistence radius
# Default: 10
# 0 - off
#
# WorldBossLevelDiff
# Difference for boss dynamic level with target
# Default: 3
#
# Corpse.Decay.NORMAL
# Corpse.Decay.RARE
# Corpse.Decay.ELITE
# Corpse.Decay.RAREELITE
# Corpse.Decay.WORLDBOSS
# Seconds until creature corpse will decay without being looted or skinned.
# Default: 60, 300, 300, 300, 3600
#
# Rate.Corpse.Decay.Looted
# Controls how long the creature corpse stays after it had been looted, as a multiplier of its Corpse.Decay.* config.
# Default: 0.1
#
# Rate.Creature.Normal.Damage
# Rate.Creature.Elite.Elite.Damage
# Rate.Creature.Elite.RAREELITE.Damage
# Rate.Creature.Elite.WORLDBOSS.Damage
# Rate.Creature.Elite.RARE.Damage
# Creature Damage Rates.
# Examples: 2 - creatures will damage 2x, 1.7 - 1.7x.
#
# Rate.Creature.Normal.SpellDamage
# Rate.Creature.Elite.Elite.SpellDamage
# Rate.Creature.Elite.RAREELITE.SpellDamage
# Rate.Creature.Elite.WORLDBOSS.SpellDamag
# Rate.Creature.Elite.RARE.SpellDamage
# Creature Spell Damage Rates.
# Examples: 2 - creatures will damage with spells 2x, 1.7 - 1.7x.
#
# Rate.Creature.Normal.HP
# Rate.Creature.Elite.Elite.HP
# Rate.Creature.Elite.RAREELITE.HP
# Rate.Creature.Elite.WORLDBOSS.HP
# Rate.Creature.Elite.RARE.HP
# Creature Health Ammount Modifier.
# Examples: 2 - creatures have 2x health, 1.7 - 1.7x.
#
###################################################################################################################
Rate.Creature.Aggro = 1
CreatureFamilyAssistenceRadius = 10
WorldBossLevelDiff = 3
Corpse.Decay.NORMAL = 60
Corpse.Decay.RARE = 300
Corpse.Decay.ELITE = 300
Corpse.Decay.RAREELITE = 300
Corpse.Decay.WORLDBOSS = 3600
Rate.Corpse.Decay.Looted = 0.1
Rate.Creature.Normal.Damage = 1
Rate.Creature.Elite.Elite.Damage = 1
Rate.Creature.Elite.RAREELITE.Damage = 1
Rate.Creature.Elite.WORLDBOSS.Damage = 1
Rate.Creature.Elite.RARE.Damage = 1
Rate.Creature.Normal.SpellDamage = 1
Rate.Creature.Elite.Elite.SpellDamage = 1
Rate.Creature.Elite.RAREELITE.SpellDamage = 1
Rate.Creature.Elite.WORLDBOSS.SpellDamage = 1
Rate.Creature.Elite.RARE.SpellDamage = 1
Rate.Creature.Normal.HP = 1
Rate.Creature.Elite.Elite.HP = 1
Rate.Creature.Elite.RAREELITE.HP = 1
Rate.Creature.Elite.WORLDBOSS.HP = 1
Rate.Creature.Elite.RARE.HP = 1
###################################################################################################################
# CHAT SETTINGS
#
# ChatFakeMessagePreventing
# Chat protection from creating fake messages using a lot spaces (other invisible symbols),
# not applied to addon language messages, but can prevent working old addons
# that use normal languages for sending data to another clients.
# Default: 0 (disible fake messages preventing)
# 1 (enabled fake messages preventing)
#
# ChatFlood.MessageCount
# Chat anti-flood protection, haste message count to activate protection
# Default: 10
# 0 (disible anti-flood protection)
#
# ChatFlood.MessageDelay
# Chat anti-flood protection, minimum message delay to count message
# Default: 1 (in secs)
#
# ChatFlood.MuteTime
# Chat anti-flood protection, mute time at activation flood protection (not saved)
# Default: 10 (in secs)
#
# Channel.RestrictedLfg
# Restrict use LookupForGroup channel only registered in LFG tool players
# Default: 1 (allow join to channel only if active in LFG)
# 0 (allow join to channel in any time)
#
# Channel.SilentlyGMJoin
# Silently join GM characters (security level > 1) to channels
# Default: 0 (join announcement in normal way)
# 1 (GM join without announcement)
#
###################################################################################################################
ChatFakeMessagePreventing = 0
ChatFlood.MessageCount = 10
ChatFlood.MessageDelay = 1
ChatFlood.MuteTime = 10
Channel.RestrictedLfg = 1
Channel.SilentlyGMJoin = 0
###################################################################################################################
# GAME MASTER SETTINGS
#
# GM.WhisperingTo
# Is GM accepting whispers from player by default or not.
# Default: 0 (false)
# 1 (true)
#
# GM.InGMList
# Is GM showed in GM list (if visible) in non-GM state (.gmoff)
# Default: 0 (false)
# 1 (true)
#
# GM.InWhoList
# Is GM showed in who list (if visible).
# Default: 0 (false)
# 1 (true)
#
# GM.LoginState
# GM mode at login
# Default: 2 (last save state)
# 0 (disable)
# 1 (enable)
#
# GM.LogTrade
# Include GM trade and trade slot enchanting operations in GM log if it enable
# Default: 1 (include)
# 0 (not include)
#
###################################################################################################################
GM.WhisperingTo = 0
GM.InGMList = 0
GM.InWhoList = 0
GM.LoginState = 2
GM.LogTrade = 1
###################################################################################################################
# VISIBILITY AND RADIUSES
#
# Visibility.GroupMode
# Group visibility modes
# Default: 0 (standard setting: only members from same group can 100% auto detect invisible player)
# 1 (raid members 100% auto detect invisible player from same raid)
# 2 (players from same team can 100% auto detect invisible player)
#
# Visibility.Distance.Creature
# Visibility.Distance.Player
# Visibility distance for different in game object
# Max limited by active player zone: ~ 166
# Min limit dependent from objects
# Default: 66 (cell size)
# Min limit is max aggro radius (45) * Rate.Creature.Aggro
#
# Visibility.Distance.Object
# Visible distance for gameobject, dynobject, bodies, corpses, bones
# Min limit is iteraction distance (5)
#
# Visibility.Distance.InFlight
# Visible distance for player in flight
# Min limit is 0 (not show any objects)
#
# Visibility.Distance.Grey.Unit
# Visibility grey distance for creatures/players (fast changing objects)
# addition to appropriate object type Visibility.Distance.* use in case visibility removing to
# object (except corpse around distences) If ‚ is distance and G is grey distance then object
# make visible if distance to it <= D but make non visible if distance > D+G
# Default: 1 (yard)
#
# Visibility.Distance.Grey.Object
# Visibility grey distance for dynobjects/gameobjects/corpses/creature bodies
# Default: 10 (yards)
#
#
###################################################################################################################
Visibility.GroupMode = 0
Visibility.Distance.Creature = 66
Visibility.Distance.Player = 66
Visibility.Distance.Object = 66
Visibility.Distance.InFlight = 66
Visibility.Distance.Grey.Unit = 1
Visibility.Distance.Grey.Object = 10
###################################################################################################################
# SERVER RATES
#
# Rate.Health
# Rate.Mana
# Rate.Rage.Income
# Rate.Rage.Loss
# Rate.Focus
# Rate.Loyalty
# Health and power regeneration and rage income from damage.
# Default: 1
#
# Rate.Drop.Items
# Rate.Drop.Money
# Drop rates
# Default: 1
#
# Rate.XP.Kill
# Rate.XP.Quest
# Rate.XP.Explore
# XP rates
# Default: 1
#
# Rate.XP.PastLevel70
# XP needed per level past 70 (Rates below 1 not recommended)
# Default: 1
#
# Rate.Rest.InGame
# Rate.Rest.Offline.InTavernOrCity
# Rate.Rest.Offline.InWilderness
# Resting points grow rates (1 - normal, 2 - double rate, 0.5 - half rate, etc) from standard values
#
# Rate.Damage.Fall
# Damage after fall rate. (1 - standard, 2 - double damage, 0.5 - half damage, etc)
#
# Rate.Auction.Time
# Rate.Auction.Deposit
# Rate.Auction.Cut
# Auction rates (auction time, deposit get at auction start, auction cut from price at auction end)
#
# Rate.Honor
# Honor gain rate
#
# Rate.Mining.Amount
# Rate.Mining.Next
# Mining Rates (Mining.Amount changes minimum/maximum usetimes of a deposit,
# Mining.Next changes chance to have next use of a deposit)
#
# Rate.Talent
# Talent Point rates
# Default: 1
#
# Rate.Reputation.Gain
# Reputation Gain rate
# Default: 1
#
# Rate.InstanceResetTime
# Multiplier for the number of days in between global raid/heroic instance resets.
# Default: 1
#
# SkillGain.Crafting
# SkillGain.Defense
# SkillGain.Gathering
# SkillGain.Weapon
# crafting/defense/gathering/weapon skills gain at skill grow (1,2,...)
# Default: 1
#
# SkillChance.Orange
# SkillChance.Yellow
# SkillChance.Green
# SkillChance.Grey
# Skill chance values (0..100)
# Default: 100-75-25-0
#
# SkillChance.MiningSteps
# SkillChance.SkinningSteps
# For skinning and Mining chance decrease with skill level.
# Default: 0 - no decrease
# 75 - in 2 times each 75 skill points
#
# DurabilityLossChance.Damage
# Chance lost one from equiped items durability point at damage apply or receive.
# Default: 0.5 (100/0.5 = 200) Each 200 damage apply one from 19 possible equipped items
#
# DurabilityLossChance.Absorb
# Chance lost one from armor items durability point at damage absorb.
# Default: 0.5 (100/0.5 = 200) Each 200 absorbs apply one from 15 possible armor equipped items
#
# DurabilityLossChance.Parry
# Chance lost weapon durability point at parry.
# Default: 0.05 (100/0.05 = 2000) Each 2000 parry attacks main weapon lost point
#
# DurabilityLossChance.Block
# Chance lost sheild durability point at damage block.
# Default: 0.05 (100/0.05 = 2000) Each 2000 partly or full blocked attacks shield lost point
#
# Death.SicknessLevel
# Starting Character start gain sickness at spirit resurrection (1 min)
# Default: 11
# -10 - character will have full time (10min) sickness at 1 level
# maxplayerlevel+1 - chaarcter will not have sickess at any level
#
# Death.CorpseReclaimDelay.PvP
# Death.CorpseReclaimDelay.PvE
# Enabled/disabled increase corpse reclaim delay at oftent PvP/PvE deaths
# Default: 1 (enabled)
# 0 (disabled)
#
###################################################################################################################
Rate.Health = 1
Rate.Mana = 1
Rate.Rage.Income = 1
Rate.Rage.Loss = 1
Rate.Focus = 1
Rate.Loyalty = 1
Rate.Drop.Items = 1
Rate.Drop.Money = 1
Rate.XP.Kill = 1
Rate.XP.Quest = 1
Rate.XP.Explore = 1
Rate.XP.PastLevel70 = 1
Rate.Rest.InGame = 1
Rate.Rest.Offline.InTavernOrCity = 1
Rate.Rest.Offline.InWilderness = 1
Rate.Damage.Fall = 1
Rate.Auction.Time = 1
Rate.Auction.Deposit = 1
Rate.Auction.Cut = 1
Rate.Honor = 1
Rate.Mining.Amount = 1
Rate.Mining.Next = 1
Rate.Talent = 1
Rate.Reputation.Gain = 1
Rate.InstanceResetTime = 1
SkillGain.Crafting = 1
SkillGain.Defense = 1
SkillGain.Gathering = 1
SkillGain.Weapon = 1
SkillChance.Orange = 100
SkillChance.Yellow = 75
SkillChance.Green = 25
SkillChance.Grey = 0
SkillChance.MiningSteps = 0
SkillChance.SkinningSteps = 0
DurabilityLossChance.Damage = 0.5
DurabilityLossChance.Absorb = 0.5
DurabilityLossChance.Parry = 0.05
DurabilityLossChance.Block = 0.05
Death.SicknessLevel = 11
Death.CorpseReclaimDelay.PvP = 1
Death.CorpseReclaimDelay.PvE = 1
###################################################################################################################
# CONSOLE AND REMOTE ACCESS
#
# Console.Enable
# Enable console
# Default: 1 - on
# 0 - off
#
# Ra.Enable
# Enable remote console
# Default: 0 - off
# 1 - on
#
# Ra.IP
# Default remote console ip address, use 0.0.0.0 for every address
#
# Ra.Port
# Default remote console port
#
# Ra.MinLevel
# Minimum level that's required to login,3 by default
#
# Ra.Secure
# Kick client on wrong pass
#
###################################################################################################################
Console.Enable = 1
Ra.Enable = 0
Ra.IP = 0.0.0.0
Ra.Port = 3443
Ra.MinLevel = 3
Ra.Secure = 1
Same thing for Scriptdev2 sorry don't have conf atm.
WoW Wotlk beta Realmlist
Code:
set realmlist 127.0.0.1
set patchlist us.version.worldofwarcraft.com
Hosts file, found in c:/windows/system32/drivers/ect/hosts (open with notepad).
Code:
# Copyright (c) 1993-2006 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 DynDNS host name E.g [Only registered and activated users can see links. ]
Internal IP DynDNS host name
External IP DynDNS host name
Now to test your connection open MySQL.exe, Then Realmd.exe, then Mangos.exe. Tada it should work.
ADMIN for Sydney WoW ~ 3.0.3 Server coming soon.
Last edited by Anthonyrox8; 09-06-2008 at 11:39 PM..
Reason: fix
Anthony, I have a problem, all other people can connect to the Server but me and people from my Town or City at least can't connect, stays at "Logging into game server" any idea what's the problem? Please PM me if you do know.
Owner of Apocalypse Pre-TBC WoW [Only registered and activated users can see links. ]
Anthony, I have a problem, all other people can connect to the Server but me and people from my Town or City at least can't connect, stays at "Logging into game server" any idea what's the problem? Please PM me if you do know.
Sorry i dont quite understand are you the one hosting? are you playing on the same computer your hosting from? If not im realli not sure, make sure ur ports are open and u have no firewall blocking them.
@animora and whatshisface sorry i dont have any skill with ArcEmu but idk this guide could possibly work, try iit
[Guide] How to get rid of Connection to server errors on a private server. No hamachi
09-01-2008
